Important Safety Instructions CAUTION: Read and follow all instructions before operating fan. Do not use fan if any part is damaged or missing. WARNING: To reduce the risk of electrical shock, do not use this fan with any solid state speed control device. INSTRUCTIONS FOR SAFE OPERATION •...
Page 3
rear guard locker 4. Align the blade shaft sleeve with the stopper of the motor shaft and install it, then tighten with the fan blade locker. stopper 5. Place front guard on rear guard, adjust the position ring to make the guards in place and tighten the screw of position ring.
Page 4
Wall Mounting Install the mounting plate to the wall with screws (included), then hang on the fan. NOTE: The arrow on the mounting plate should be downward. Fan can also be mounted to concrete wall with the appropriate fastener. Mounting Plate OPERATING INSTRUCTIONS To adjust airflow position: Pull the swing chain, the fan will keep on swinging.
receptacle or other outlet device. Do not unplug by pulling on cord. 2. Open fuse cover - Slide open the fuse access cover on top of attachment plug towards blades, as shown in Figure 1. 3. Remove the fuse carefully using a flat head screwdriver, as shown in Figure 2. 4.
Product Specifications Model#: ILG8IN18X Voltage: 120V, 60Hz Current: 0.6A Power: 70W WARRANTY This fan comes with a ONE-YEAR LIMITED COMPONENT WARRANTY. If your fan does not appear to be working properly, please contact our service center by calling 1-800-317-1688. Prior to your call, we encourage you to visit our website www.ilivingusa.com...
Page 7
At iLiving USA, we are committed to bringing top quality products to our customers. iLIVING USA 860 Mahler Road, Burlingame, CA 94010 Tel: 1-800-317-1688 Email: service@ilivingusa.com Like us on Facebook: https://www.facebook.com/ilivingusa/ Follow us on Twitter: @iLIVINGUSA Check out our website:...
Need help?
Do you have a question about the ILG8IN18X and is the answer not in the manual?
Questions and answers