Advertisement
Quick Links
7" ROUND LED LIGHT
UNIVERSAL
BE7RW108W-H
TOOLS
REQUIRED
- 17mm Socket or Wrench
- #4 Allen Tool
WARNINGS/CAUTIONS BEFORE STARTING INSTALLATION
Before you install this kit —
instructions, warnings, cautions, and notes contained in
this installation instruction guide. Consult your vehicle
owner's manual for proper disconnection of electrical and
lifting of vehicle if required for installation of this product.
This install may require some technical skills and
knowledge of basic mechanical work. If you do not feel that
you are capable of performing this install please take this
product to a trained professional.
After reading this guide please contact us with any
questions or concerns before installing product.
Customer Service: 855-680-9595
DV8 Offroad is not responsible for any bodily injury or harm to you
or your vehicle as a result of an improper install.
555 E Queen Creek Rd
Bldg A
Chandler, AZ 85286
WWW.DV8OFFROAD.COM
SKILL
LEVEL
- Novice/Intermediate
- 1 (you)
Little skill level required, you can
easily install it by yourself.
Read and understand all
INSTALLATION
PRODUCT
TIME
- 1 Hour
Time to install this should only
take about an hour
Proper installation of this kit required knowledge of the factory
recommended procedures for removal and installation of original
equipment components. We recommend that the factory shop manual
and any special tools needed to service your vehicle be on hand during
the installation. Installation of this kit without proper knowledge of the
factory recommended procedures may affect the performance of these
components and the safety of the vehicle
• Always wear eye protection when operating power tools
Inspect all contents of this package to make sure product is not damaged
and all installation hardware has been included. If parts are missing from
kit, please be prepared to provide the following information
1. Name of purchase location
2. Bar Code on side of box
3. Date above bar code
4. Date inside box cover
NEED HELP?
MANUAL
REQUIRED
855-680-9595
Advertisement
Related Manuals for DV8 OFFROAD BE7RW108W-H
Summary of Contents for DV8 OFFROAD BE7RW108W-H
- Page 1 1. Name of purchase location Customer Service: 855-680-9595 2. Bar Code on side of box DV8 Offroad is not responsible for any bodily injury or harm to you 3. Date above bar code or your vehicle as a result of an improper install.
- Page 2 INSTALLATION MANUAL Begin by unpacking all items and inspecting for missing pieces or damage. If you have any concerns, please contact the company the product was purchased from. Extra hardware may be included with the product. HARDWARE INCLUDED (1) M10x30mm Bolts (1) M10 Lock Nuts (1) Rubber Base Plate STEP 1 |...
- Page 3 INSTALLATION MANUAL STEP 3 | To mount the DV8 7” round LED light remove the nylon locking nut and thread the provided M10 hardware through your chosen mounting bracket hole/slot ensuring the rubber base plate is kept in place against the lights mounting bracket.
- Page 4 INSTALLATION MANUAL STEP 5 | Adjust the LED light to your preference. While holding the top of the mounting bolt down use a 17mm socket or wrench to secure the lights nylon lock nut. STEP 6 | Double check that all mounting hardware is secure.
Need help?
Do you have a question about the BE7RW108W-H and is the answer not in the manual?
Questions and answers