Dell EMC AX4-5 Hardware Installation And Troubleshooting Manual page 28

Figure 2-9. Cabling a SAN-Attached Cluster to an AX4-5F Storage System
cluster node 1
0 1
sw0
Cabling a SAN-Attached Cluster to an AX4-5FX Storage System
1 Connect cluster node 1 to the SAN.
Connect a cable from HBA port 0 to Fibre Channel switch 0 (sw0).
a
Connect a cable from HBA port 1 to Fibre Channel switch 1 (sw1).
b
2 Repeat step 1 for each cluster node.
3 Connect the storage system to the SAN.
Connect a cable from Fibre Channel switch 0 (sw0) to SP-A Fibre port
a
0(First fibre port).
Connect a cable from Fibre Channel switch 0 (sw0) to SP-A Fibre port
b
1(Second fibre port).
Connect a cable from Fibre Channel switch 0 (sw0) to SP-B Fibre port
c
2(Third fibre port).
28
Cabling Your Cluster Hardware
HBA ports (2)
SP-B
0 Fibre 1 Fibre
AX4-5F storage system
HBA ports (2)
A
B
0 Fibre 1 Fibre
A
B
cluster node 2
0 1
sw1
SP-A