Installing Printer Drivers and Software
Make sure the power cable is connected to the printer and the printer is on.
1
Insert the Drivers and Utilities CD into your computer.
2
Plug the USB cable (sold separately) into the USB connector
3
Plug the other end of the USB cable into the square USB connector
4
Follow the on-screen instructions to install the printer drivers and printer documentation.
5
Select Typical to install all components. Select Custom to install specific components.
Insert the remaining two CDs, one at a time, to install your photo editing software programs.
6
Follow the on-screen instructions on the printer.
USB connector
to PC
Printing From a Computer
To Print
Turn on your computer and printer, and make sure they are connected with a USB cable.
1
Using your preferred application, open the photos you want to print.
2
Access printer settings by selecting Print or Page Setup from the File menu (depending on
3
your application and operating system).
Make sure the printer is selected as the current printer and that the paper size is set to
4
4 x 6 in. (102 x 152 mm).
Change any other settings as needed, then click OK or Print. (Depending on your application
5
and operating system, you may first need to return to the main menu and select Print from
the File menu.)
NOTE:
Print selections made from the printer in standalone mode (use of printer without a computer) are
not used when you send a print job from the computer.
26
Using Your Printer
on your computer.
on the printer.