Cleaning the Paper Feed Roller
To prevent misfeeds and to make sure your photos are the best quality, keep the feed roller clean. Inspect the
roller weekly for debris particles, and clean if necessary.
Unplug the AC power adapter.
Remove the paper tray from the printer, and leave the paper tray door open.
Lightly moisten a lint-free cloth with water.
NOTICE: Do not use cotton or cotton swabs to clean the feed roller.
Use the moistened cloth to gently wipe clean the surface of the feed roller. Advance the feed roller with
your thumb as necessary, and continue cleaning.
Allow the feed roller to fully dry before plugging the AC power adapter back in.
Handling and Storing the Photo Paper and Photo Cartridge
For best quality prints, store the photo paper and photo cartridge in a location where the temperature does
not exceed 85
To avoid getting fingerprints on the ribbon, handle the photo cartridge by the spool ends.
To avoid fingerprints on your prints, handle the photo paper by the edges or by the perforated tabs. Do not
touch the glossy side of the paper.
When storing the printer, remove the paper tray, then close the paper tray cover and paper tray door to keep
out dust and debris. Store paper flat.
Keep the photo paper and photo cartridge away from direct sunlight and out of high-temperature
environments such as a vehicle parked in the sun.
Care and Maintenance