Sonoff MINIR4M Manual

Introduction

MINI Extreme is an extremely compact Wi-Fi smart switch that can be installed in the mounting box, transforming your regular switch into smart switch. It supports Matter protocol, enabling seamlessly work with other smart devices from different brands to create a customized home automation system.

• Voice Control
• External switch
• Timer Schedule
• OTA Upgrade
• Support Matter
• Power-on State
• LAN Control
• Inching Mode
• Group Control
• Smart Scene

Parts and Features

1. Button
   Press once: Changing the on/off state of relay contacts
   Press and hold for 5 seconds: Device enters the pairing mode.
2. Wi-Fi LED indicator (Blue)
   
   eWeLink Mode
   • Keeps on: Device is online.
   • Flashes twice: LAN
   • Flashes once: Offline
   • Flashes two short and one long: Device is in pairing mode.
   • Flashes three times: Trigger mode switched successfully
     
     Matter Mode
   • Keeps on: Device is online.
   • Flashes once: Offline
   • Flashes two short and one long: Device is in pairing mode.
   • Flashes three times: Trigger mode switched successfully; Identify
3. Wiring ports

Matter-compatible ecosystem

Specification

Installation

Power off

*Please install and maintain the device by a professional electrician. To avoid electric shock hazard, do not operate any connection or contact the terminal connector while the device is powered on!

Wiring instruction

To ensure the safety of your electrical installation, it's essential either a Miniature Circuit Breaker (MCB) or a Residual Current Operated Circuit Breaker (RCBO) with an electrical rating of 10A has been installed before the MINIR4M.

• No matter S1 and S2 are connected or left idle to the external switch, this device can be controlled by automation or the App.
• It is prohibited to connect S1 and S2 terminals to the neutral or ground wire, in order to avoid damaging the equipment and causing danger.
• Make sure all wires are connected correctly.

Power on

After powering on, the device will enter the Pairing Mode defaulted during the first use, and the Network indicator flashes in a cycle of two short and one long.

*The device will exit the Pairing Mode if not been paired within 10 mins. If you want to enter this mode again, please long press the button for 5s until the Network indicator flashes in a cycle of two short and one long and then release.

Add device

Method 1: Matter Pairing

Open a Matter-compatible App ( e.g. Alexa App, Google Home App, or Apple Home App, etc ) to scan the Matter QR code on the Quick Guide or the device itself to add the device.

Method 2: eWeLink App Pairing

1. Download the"eWeLink"App
   Please download the "eWeLink" App
   
   from Google Play Store
   
   or Apple App Store
   
2. Add device
   1. Please follow the wiring instructions to connect the wires (ensure power is disconnected in advance and consult an electrician if needed)
      
   2. Power on the device
      
   3. Enter "Scan QR code"
      
   4. Scan the Matter QR code on the device body or the back page of the Quick Start Guide.
      
   5. Long press the button for 5 seconds
      
   6. Check Wi-Fi LED indicator flashing status (Two short and one long flashes)
      
   7. Select"Add Device"
      
   8. Search for the device and start connecting
      
   9. Select the "Wi-Fi" network and enter the password.
      
   10. Device"Added completely".
       

Website: sonoff.tech

Documents / Resources

References

• Google Play
• App Store - Apple
• SONOFF Official Homepage| Smart Home automation SONOFF Official

Download manual

Here you can download full pdf version of manual, it may contain additional safety instructions, warranty information, FCC rules, etc.

Download Sonoff MINIR4M Manual