Power Management Options In Windows Vista - Dell XPS DCDR01 Owner's Manual

Power Management Options in Windows Vista

The Microsoft Vista power management features can reduce the amount of
electricity your computer uses when it is on and you are not using it. You can
reduce power to just the monitor or the hard drive, or you can use sleep mode
or hibernate mode to reduce power to the entire computer. When the
computer exits from a power conservation mode, it returns to the operating
state it was in prior to entering the mode.
Sleep Mode
Sleep mode conserves power by turning off the display and the hard drive
after a predetermined period of inactivity (a time-out). When the computer
exits sleep mode, it returns to the same operating state it was in before
entering sleep mode.
To enter sleep mode in Windows Vista, click Start , click the arrow in the
lower-right corner of the Start menu, and then click Sleep.
To exit sleep mode, press a key on the keyboard or move the mouse.
Hibernate Mode
Hibernate mode conserves power by copying system data to a reserved area on
the hard drive and then completely turning off the computer. When the
computer exits hibernate mode, it returns to the same operating state it was
in before entering hibernate mode.
To manually enter hibernate mode in Windows Vista, click Start , click the
arrow in the lower-right corner of the Start menu, and then click Hibernate.
Configuring Power Management Settings
You can use the Windows Power Options Properties to configure the power
management settings on your computer.
→ Control Panel→
To access Power Options Properties, click Start
System and Maintenance→ Power Options.
42
Setting Up Your Computer