Dell XPS DCDR01 Owner's Manual page 81

Power
ACPI Suspend
Type
AC Recovery
Remote Wake Up This option turns on the computer when a user tries to access
Wake-Up By
Ring
Auto Power On
Boot
Removable
Device
Priority
Hard Disk Boot
Priority
1st Boot Device
through 3rd Boot
Device
Boot Other
Device
Exit
Exit Options
Specifies the ACPI suspend type. The default is S3.
Specifies the behaviour of the system after recovering from a
power loss.
• On — The computer turns on after it recovers from a power
failure.
• Off — The computer remains powered off.
• Last — The computer returns the power state it was in
before the power failure.
the computer through the LAN.
This option turns on the computer when an incoming call is
detected on the modem.
Enables you to set an alarm to turn on the computer
automatically.
Sets the boot priority among the attached removable devices.
Sets the hard drive boot priority. The items displayed are
dynamically updated according to the hard drives detected.
Sets the boot device sequence. Only the bootable devices that
are connected to the computer are listed as options.
This option enables you to boot from other devices such as a
memory key.
Provides options to Exit Saving Changes, Exit Discarding
Changes, Load Setup Default, and Discard Changes.
System Setup
81