Dell XPS C100J Quick Reference Manual page 61

Power
ACPI Suspend
Type
AC Recovery
Remote Wake Up Notifies the computer to turn on when a user tries to access the
Wake-Up By
Ring
Auto Power On
Boot
Hard Disk Boot
Priority
First Boot
Device through
Third Boot
Device
Boot Other
Device
Exit
Exit Options
Specifies the Advanced Configuration and Power Interface
(ACPI) suspend type. ACPI is a power management
specification which enables the operating system to control the
amount of power given to each device attached to the
computer. The default is S3.
Specifies the behavior of the system after recovering from
a power loss.
• On—The computer turns on after it recovers from a power
failure.
• Off—The computer remains powered off.
• Last—The computer returns the power state it was in before
the power failure.
computer through the LAN.
Notifies the computer to turn on when an incoming call is
detected on the modem.
Enables you to set an alarm to turn on the computer
automatically.
Sets the hard drive boot priority. The items displayed are
dynamically updated according to the hard drives detected.
Sets the boot device sequence. Only the bootable devices that
are connected to the computer are listed as options.
Enables you to boot from other devices such as a memory key.
Provides options to Exit Saving Changes, Exit Discarding
Changes, Load Setup Default, and Discard Changes.
Configuring the BIOS
61