Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for WAC Hug Flush 52
Summary of Contents for WAC Hug Flush 52
- Page 1 HUG PULL CHAIN Installation Instructions...
-
Page 2: Fan Support
FAN SUPPORT For fast service have the following information below when you call: • Model Name and Number • Part Number and Part Description • Date Of Purchase and Purchase Location 1-800-526-2588 option MON-FRI 8AM-8PM EST Email: fansupport@waclighting.com Please read and save these instructions before installation DO NOT RETURN TO STORE... -
Page 3: Safety Rules
To avoid personal injury or damage to the fan and by WAC could result in personal injury or property damage and will void the persons. other items, please be cautious when working around warranty. -
Page 4: Table Of Contents
TABLE OF CONTENTS This WAC Fan is: Package Contents Mounting Options Installing the Mounting Bracket Damp Location-listed to the strictest UL/cUL safety regulations. Finished and rated for Attaching the Fan Blades interior and exterior use. Pull Chain Assembly Hanging the Fan... -
Page 5: Tools And Materials Required
TOOLS & MATERIALS REQUIRED PACKAGE CONTENTS Fan Blade (Set of 3) 44 inch: RPL-F107-44-BD-** 52 inch: RPL-F108-52-BD-** Adapter Plate Motor Housing Electrical tape Wire cutters Phillips screwdriver Step ladder Mounting Bracket Trim Ring RPL-HUG-TRIM-** RPL-HUG-HANGER Hanging Weight: 44-inch: 6.85kg / 15.1lbs. Hardware Bag 52-inch: 7.1kg / 15.7 lbs. -
Page 6: Mounting Options
MOUNTING OPTIONS INSTALLING THE MOUNTING BRACKET ATTACHING THE FAN BLADES Standard Ceiling Slope Ceiling Caution: Remember to disconnect the power at the circuit breaker. CAUTION: To prevent electrical shock, ensure electricity has been Remove 1 set screw from mounting bracket and set aside for use in turned off at the circuit breaker before beginning. -
Page 7: Pull Chain Assembly
PULL CHAIN ASSEMBLY HANGING THE FAN HANGING THE FAN 1. Remove 1 opposing screw and loosen the other 2 for the mounting bracket. 2. Pass supply wires through mounting bracket. 3. Lift motor assembly and hang it on the hook on the 1. -
Page 8: Making The Electrical Connections
MAKING THE ELECTRICAL CONNECTIONS INSTALLING THE LED MODULE WARNING: Before starting installation, disconnect the power by turning off the circuit breaker or removing the fuse at fuse box. 1. Turn off circuit breakers and wall switch. NOTE: Your Fan comes standard as 3000K (neutral white color). You can 2. -
Page 9: Installing The Glass
Slide the switch to the left for warm weather operation. Slide the 1. Twist-lock lens into place firmly. 1. You are now ready to Power ON your WAC Fan. NOTE: Speed settings for warm or cool weather depend on switch to the right for cool weather operation. -
Page 10: Troubleshooting
TROUBLESHOOTING TROUBLESHOOTING My Fan Will Not Start Check main and branch circuit fuses or circuit breakers. If possible, please consider using a longer than included downrod. Check line wire connections to fan and switch wire connections in the switch housings. WARNING: Make sure the main power is turned off! For all other questions, please contact our dedicated Fan Support specialists. -
Page 11: Certificate Of Warranty
(o según el período de tiempo indicado en el material). Quedan of a defect in writing must be received by WAC within five (5) years from the date of à compter de la date d’achat (ou selon la période précisée dans les informations excluidos de la garantía todos los componentes de terceros que tengan la garantía de... - Page 12 F - 1 0 7 L / F - 1 0 8 L waclighting.com...
Need help?
Do you have a question about the Hug Flush 52 and is the answer not in the manual?
Questions and answers