Table of Contents
Advertisement
Troubleshooting
NOTE: If you see a message stating
that no diagnostics utility partition has
been found, run the Dell Diagnostics
from the Drivers and Utilities media.
4
Press any key to start the Dell Diagnostics
from the diagnostics utility partition on your
hard drive, and follow the instructions on the
screen.
Starting the Dell Diagnostics From the Dell
Drivers and Utilities
1
Insert the Drivers and Utilities media.
Shut down and restart the computer.
2
3
When the DELL logo appears, press <F12>
immediately.
NOTE: If you wait too long and the
operating system logo appears,
continue to wait until you see the
®
Microsoft
shut down your computer and try
again.
44
Media
®
Windows
desktop; then,
NOTE: The next steps change the boot
sequence for one time only. On the
next start-up, the computer starts
according to the devices specified in
the system setup program.
When the boot device list appears, highlight
4
CD/DVD/CD-RW and press <Enter>.
5
Select the Boot from CD-ROM option from
the menu that appears and press <Enter>.
6
Type
to start the CD menu and press
1
<Enter> to proceed.
7
Select Run the 32 Bit Dell Diagnostics from
the numbered list. If multiple versions are
listed, select the version that is appropriate
for your computer.
8
When the Dell Diagnostics Main Menu
appears, select the test that you want to run,
and follow the instructions on the screen.
Advertisement
Table of Contents
Troubleshooting
