EuroLite AKKU UP-4 QCL Spot QuickDMX MK2 User Manual page 30

INSTALLATION
WARNING! Risk of injury caused by falling objects
Devices in overhead installations may cause severe injuries when crashing down. Make sure that the
device is installed securely and cannot fall down. The installation must be carried out by a specialist
who is familiar with the hazards and the relevant regulations.
For a homogeneous and soft light of the uplight, please use the enclosed frost filter. Simply fix this filter over the
lenses with the enclosed knurled head screw.
The device may be placed on the floor or fastened to a truss or similar rigging structure. The device must never be
fixed swinging freely in the room.
Placing the device
Place the product as desired and adjust the tilt angle via
the folding foot.
Fixing to a truss
1 The rigging structure must support at least 10 times
the weight of all fixtures to be installed on it.
2 Block access below the work area and work from a
stable platform when installing the device.
3 Use rigging hardware that is compatible with the
structure and capable of bearing the weight of the
device. Please refer to the "Accessories" section for a
list of suitable rigging hardware.
4 Secure the device with a safety bond or other
secondary attachment.
attachment must be sufficiently dimensioned in
accordance with
regulations and constructed in a way that no part of
the installation can fall down if the main attachment
fails. An appropriate eyelet is mounted on the device
for fixation of the safety bond. Fasten the safety bond
in such a way that, in the event of a fall, the maximum
drop distance of the device will not exceed 20 cm.
5 After installation, the device requires inspections
periodically to prevent the possibility of corrosion,
deformation and looseness.
Changing the beam angle
With the delivery of the device you will receive a frost filter, with which the beam angle can be changed from 7° to
approx. 20°. If you want to change the beam angle of the device, attach the filter to the top of the device using the
knurled screw. Make sure the screw is tightened to prevent accidental release of the frost filter.
This secondary
the latest industrial
safety
safety
30/44
2
00158399, Version 1.0
1