Summary of Contents for EuroLite AKKU MINI IP UP-4 Spot MK2
Page 1
MANUAL UNIT Bedienungsanleitung User Manual AKKU Mini IP UP-4 QCL Spot MK2 Kleines IP65-Akku-Uplight mit RGBW-LEDs und IR-Fernbedienung Mini battery uplight IP65 with RGBW LEDs and IR remote control STAND BATTERY RGBW IP65 15° STROBE ALONE POWERED No. 41700616 www.eurolite.de...
Diese Bedienungsanleitung gilt für die Artikelnummer / This user manual is valid for the article number: 41700616 Das neueste Update dieser Bedienungsanleitung finden Sie im Internet unter: You can find the latest update of this user manual on the Internet under: www.eurolite.de 2/20 00150545, Version 1.0...
BEDIENUNGSANLEITUNG AKKU MINI IP UP-4 QCL SPOT MK2 Lesen Sie vor der Verwendung des Geräts diese Bedienungsanleitung. Sie erhalten dadurch wichtige Hinweise für den korrekten Betrieb. Alle Personen, die mit der Aufstellung, Inbetriebnahme, Bedienung, Wartung und Instandhaltung dieses Gerätes zu tun haben, müssen - entsprechend qualifiziert sein - diese Bedienungsanleitung genau beachten - die Bedienungsanleitung als Teil des Produkts betrachten...
SICHERHEITSHINWEISE Verwendungszweck – Bei diesem Produkt handelt es sich um einen LED-Projektor, mit dem sich dekorative Lichteffekte erzeugen lassen. Das Produkt ist nur zur Dekoration und nicht für die Raumbeleuchtung in Haushalten geeignet. Das Produkt dient zur mobilen Beleuchtung im Innen- und Außenbereich und ist nach IP65 aufgebaut.
GERÄTEBESCHREIBUNG (1) Linse / 4 W 4in1 QCL RGBW LED (2) Infrarotsensor (3) Klappfuß (4) Feststellschraube für Klappfuß (5) Gummifuß (6) Netzanschluss (7) LED-Anzeige mit Bedientasten (8) Ein-/Aus-Schalter /1.6A MENU ENTER ON / OFF AKKU MINI IPUP 4 Spot No. 41700616 EAN 4026397726787 ·...
Betriebsart. Nehmen Sie nun die notwendigen Menüeinstellungen für die jeweilige Betriebsart mit den Bedientasten vor. Auch wenn Sie das Gerät vom Stromnetz trennen, bleiben alle Einstellungen gespeichert. Das Gerät kann im Standalone-Modus über das Bedienfeld und die Fernbedienung EUROLITE IR-7 betrieben werden.
Page 8
Farbwechsel Im Modus CC wechselt das Gerät automatisch die Farbe schrittweise, mit einer einstellbaren Geschwindigkeit. Drücken Sie die Taste MENU so oft, bis das Display die Betriebsart CCXX anzeigt. Wählen Sie die gewünschte Ablaufgeschwindigkeit mit den Tasten UP bzw. DOWN aus (00 = langsam, 99 = schnell).
Betrieb mit der Fernbedienung IR-7 Das Gerät muss für die Ansteuerung per Fernbedienung aktiviert werden. Wählen Sie dazu im Menüpunkt IrYE die Einstellung IrYE. Halten Sie beim Betätigen einer Taste die Fernbedienung immer in Richtung des Sensors (siehe Gerätebeschreibung). Zwischen Fernbedienung und Sensor muss Sichtverbindung bestehen.
heraus. Für den Betrieb der Fernbedienung wird eine 3-V-Knopfzelle Typ CR 2025 benötigt. Achten Sie beim Einsetzen darauf, dass der Pluspol der Knopfzelle im Halter nach oben zeigt. • Entnehmen Sie vorsichtshalber die Batterie aus der Fernbedienung bei längerem Nichtgebrauch. REINIGUNG UND WARTUNG Das Produkt ist bis auf eine gelegentliche Reinigung für Sie wartungsfrei.
USER MANUAL AKKU MINI IP UP-4 QCL SPOT MK2 Please read these instructions carefully before using the product. They contain important information for the correct use of the product. Every person involved with the installation, operation and maintenance of this device has to - be qualified - follow the instructions of this manual - consider this manual to be part of the total product...
SAFETY INSTRUCTIONS Intended use – This product is an LED projector for creating decorative effects. This product is designed to light indoor and outdoor areas and is IP65 rated. The product is only suitable for decoration and not for household lighting. The product is fitted with LEDs that consume little power, have an extremely long service life and develop little heat.
DESCRIPTION OF THE DEVICE (1) Lens / 4 W 4in1 QCL RGBW LED (2) Infrared sensor (3) Folding foot (4) Fixation screw for folding foot /1.6A MENU ENTER ON / OFF (5) Rubber foot (6) Power in (7) LED display with operating buttons AKKU MINI (8) ON/OFF switch IPUP 4...
The operating modes can be selected by means of the display and the control buttons. All settings remain stored even if the device is disconnected from the mains. The device can be operated in stand-alone mode via the control board and the EUROLITE IR-7 remote control. Menu structure The operating mode is set via the display and the buttons MENU, UP, DOWN and ENTER.
Display Mode Function 100 - battery fully charged Battery charge status U_XXX Digits 0 - battery discharged IrYE IR remote control on IR remote control IrYE Irno IR remote control off rXXX r0-255 Red dark > bright GXXX G0-255 Green dark > bright Color mix bXXX b0-255...
Page 17
Color change In mode CC the device will automatically change the color step by step, at an adjustable speed. Press the MENU button so many times until CCXX is indicated in the display. Use the UP and DOWN buttons to adjust the desired running speed (00 = slow, 99 = fast).
Operation with the IR remote control IR-7 The device must be activated for remote control. For this, set menu item IrYE to IrYE. When actuating a button, always direct the remote control towards the sensor (see Description of the Device). There must be no obstacles between remote control and the sensor.
CLEANING AND MAINTENANCE The product is maintenance-free, except for occasional cleaning. You can use a lint-free, slightly dampened cloth for cleaning. Disconnect the product from power before cleaning. Refer all servicing to qualified personnel. The LEDs are permanently installed; they cannot be replaced. PROTECTING THE ENVIRONMENT Disposal of old equipment When to be definitively put out of operation, take the product to a local recycling plant for a...
EUROLITE Softbag for 6x AKKU Mini IP UP-4 QCL Spot MK2 No. 41700617 ROADINGER Flightcase 8x AKKU Mini IP UP-4 QCL Spot MK2 with No. 31005245 charging function Eurolite is a brand of Steinigke Showtechnic GmbH Andreas-Bauer-Str. 5 97297 Waldbüttelbrunn Germany D00150545 Version 1.0 Publ. 22/01/2024...
Need help?
Do you have a question about the AKKU MINI IP UP-4 Spot MK2 and is the answer not in the manual?
Questions and answers