Download Print this page
Miele CS1421 S Installation Instructions Manual
Miele CS1421 S Installation Instructions Manual

Miele CS1421 S Installation Instructions Manual

Hide thumbs Also See for CS1421 S:

Advertisement

Quick Links

Installation Instructions
CS1421 S
en - CA
Installation, repair and maintenance work should be performed by
a Miele authorized service technician in accordance with national
and local safety regulations and the provided installation instructions.

Advertisement

loading
Need help?

Need help?

Do you have a question about the CS1421 S and is the answer not in the manual?

Questions and answers

Summary of Contents for Miele CS1421 S

  • Page 1 Installation Instructions CS1421 S en - CA Installation, repair and maintenance work should be performed by a Miele authorized service technician in accordance with national and local safety regulations and the provided installation instructions.
  • Page 2: Safety Instructions And Warnings

    Safety instructions and warnings Correct use WARNING- When using your The grill is intended for household appliance follow basic use only, as described in these precautions, including the instructions. Using it for other purposes following: is not permitted, and may be dangerous.
  • Page 3 Safety instructions and warnings Children Packing materials (cling wrap, styrofoam) can be dangerous for Always supervise any children in the children because of the danger of vicinity of the appliance. Do not allow suffocation. Keep such materials out of children to play with the unit. the reach of children, and dispose of Children should use the grill only if them as promptly as possible.
  • Page 4 Safety instructions and warnings Technical safety Do NOT use a power bar or extension cord to connect the Only skilled persons duly authorized appliance to the power supply. They do by the manufacturer may install this not guarantee the required safety of the appliance or perform maintenance and appliance (e.g., danger of overheating).
  • Page 5: Correct Use

    This will also Defective components should be reduce the lifespan of the appliance. replaced by Miele original replacement parts only. Only these parts are guaranteed by the manufacturer to comply with safety requirements.
  • Page 6 Safety instructions and warnings Do not set up or operate the If the appliance is plugged into a appliance in the open air. nearby socket, check to be sure that the power cord does not come into Do not use the ledge for storage. If contact with the hot appliance.
  • Page 7: Safety Instructions For Installation

    However, under certain conditions it may be possible for installation in these applications. Please contact the Miele Technical Service Department with specific requirements. The appliance should not be installed immediately beside an electric barbeque (CS 1312/1322) or the Tepan Yaki (CS 1326).
  • Page 8 SAFETY INSTRUCTIONS FOR INSTALLATION Safety distances above the If there is more than one appliance appliance beneath a hood (e.g. wok burner and electric cooktop), and they have different minimum safety distances always observe the greater distance. The minimum distance between the appliance and an installed exhaust hood must be at least 25 "...
  • Page 9 SAFETY INSTRUCTIONS FOR INSTALLATION Safety distances to the sides of the appliance The appliance should only be installed as shown in the illustrations, while maintaining the required safety distances shown. Do not install the appliance between two tall cabinets, this is a fire hazard. A distance of alteast 2"...
  • Page 10: Installation

    Installation Installation dimensions a Spring clips b Appliance front c Installation height d Power supply box with connection cable, L = 78 " (2000 mm) e Browning unit, height-adjustable...
  • Page 11 Installation Cut out If during installation the seal around ^ Make the worktop cut-out for one or the frame does not sit flush with the more appliances as applicable. countertop in the corners, the corner Remember to maintain a minimum radius, maximum "...
  • Page 12: Installation Of Multiple Appliances

    Installation Installation of multiple appliances When installing more than one combiset appliance, a support bar b must be installed between the appliances. Countertop cut-out Countertop cut-out two appliances three appliances For the installation of two appliances For the installation of three appliances the width of the countertop cut-out D is the width of the countertop cut-out D is the sum of A and C.
  • Page 13 Installation Sample calculations for a countertop cut-out for three appliances appliance width appliance width appliance width Countertop minus " (8 mm) minus " (8 mm) cut-out 11" " 11" " (280 mm) (280 mm) (848 mm) (288 mm) 11" 15" "...
  • Page 14 Installation 2 5 - 3 0 5 0 5 0 2 5 - 3 0 5 6 8 3 7 2 / 2 8 0 / 5 7 6 3 8 0 / 2 8 8 / 5 6 8 3 7 2 / 2 8 0 / a Spring clips...
  • Page 15 Installation Attach the spring clips and support bars Wood or solid surface countertops Granite countertop 2 5 - 3 0 2 5 - 3 0 ^ Position and attach the spring clips ^ Place the supplied spring clips a a and support bars b with strong, and the support bars b at the double-sided tape c.
  • Page 16 Installation ^ Coat the edges of the spring clips a, ^ and the space d between the strips b and the countertop with silicone (supplied).
  • Page 17 Installation Installing the appliance ^ Feed the power cord down through the cut-out. ^ Then place the front side of the appliance in the countertop cut-out. ^ Then with a hand on each side of the appliance press down evenly on the edges until it clicks into position.
  • Page 18: Tiled Surfaces

    Installation Sealing Tiled surfaces The grouting a and shaded area under The appliance must not be permanently the appliance frame must be flat and sealed into the countertop when even, so that the frame will lie evenly installed. The sealing strip under the edge of the appliance provides a and the sealing strip under the edge of the upper part of the appliance can...
  • Page 19: Electrical Connection

    Electrical connection Power supply CAUTION: Before installation or ^ Be sure your electrical supply servicing, disconnect the power matches the data plate. supply by either removing the fuse, shutting off the main power supply The combiset is equipped with a or manually "tripping"...
  • Page 20 Alteration rights reserved / 4608 M.-Nr. 07 472 000 / 00 For the most updated manual see the Miele web site.