Advertisement
Quick Links
Advertisement
Related Manuals for FLIR Si2 Series
Summary of Contents for FLIR Si2 Series
- Page 1 Safe operations manual FLIR Si2x-Series...
-
Page 3: Table Of Contents
4 FLIR Si2x-Series operations ........ -
Page 4: Notice To User
This manual provides important information about the FLIR Si2x-Series. Before operating the device, you must read, understand, and follow all instructions, warnings, and legal disclaimers. For information on the use and operation of the FLIR Si2x-Series camera, please refer to the FLIR Si2–Series user manual. 1.2 Online documentation Our manuals are continuously updated and published online. -
Page 5: Disclaimers
2.2 Copyright © 2025 FLIR Systems, Inc. All rights reserved worldwide. No parts of the soft- ware including source code may be reproduced, transmitted, transcribed or translated into any language or computer language in any form or by any means, electronic, magnetic, optical, manual or otherwise, without the prior written per- mission of FLIR Systems. -
Page 6: Safety Information
3.2 Maintenance The Si2 user manual contains all the complete information. The FLIR Si2x acous- tic imager shall be used in potentially explosive atmospheres according to the re- quirements in the EN/IEC 60079-14 and local regulations. -
Page 7: Ex Compliance Marking
3.4 Certifications Scheme Standards ATEX EN IEC 60079-0:2018 EN 60079-11:2011 EN 300 328 EN 301 893 EN 301 489-1/-17 Safety (LVD) IEC 62368-1:2018 The FLIR Si2x-Series certifications are available online at http://support.flir.com/resources/gq2z. #T810652; r. AC/101642/101642; en-US... -
Page 8: Flir Si2X-Series Operations
4.1 Introduction The FLIR Si2x-Series series represents the most advanced acoustic perform- ance and decision support available on the market today. The FLIR Si2x-Series series are ATEX certified acoustic cameras for hazardous locations. These cam- eras allow quantification of pressurized gas leakage, mechanical fault identifica- tion and partial discharge detection in explosive atmosphere. - Page 9 4 FLIR Si2x-Series operations 1.1. Temporarily remove the battery guard by grasping the ends near the front of the camera. If using a compliant neck strap, remove it first. 1.2. Slide the battery guard down from the top and make sure the neck strap attachment points are free.
-
Page 10: Charge The Battery
Reattach the battery guard: 3.1. Orient the battery guard with the FLIR logo facing outward. 3.2. Insert the front end to cover the front of the battery casing. Then, pull the other end to fit over the back where the battery compart- ment is located. -
Page 11: Usb Operations
4 FLIR Si2x-Series operations For more information, see the Si2 user´s manual, chapter Battery charging. 4.4 USB operations WARNING Do not open the USB cover in an explosive area. For file transfer and camera updates, the USB cover must be opened. For more information about file transfer, see the Si2 user´s manual, chapter Basic opera-... - Page 12 Customer support http://support.flir.com Copyright © 2025, FLIR Systems, Inc. All rights reserved worldwide. Disclaimer Specifications subject to change without further notice. Models and accessories subject to regional market considerations. License procedures may apply. Products described herein may be subject to US Export Regulations. Please refer to exportquestions@flir.com with any questions.
Need help?
Do you have a question about the Si2 Series and is the answer not in the manual?
Questions and answers