Download Print this page
Biamp CBC 2500 PM Installation Manual
Biamp CBC 2500 PM Installation Manual

Biamp CBC 2500 PM Installation Manual

Ceiling mounted bar: pole mount

Advertisement

Quick Links

Parlé
Ceiling Mounted Bar: Pole Mount (CBC 2500 PM)
Installation Guide
CONTENTS
• Parlé ABC 2500/2500a Bar
• Ceiling Mount Assembly (x1)
• Bar Mounting Plate (x1)
• Pipe (3 lengths)
[6", 1', 2' (153, 305, 610 mm)]
• Bracket Coupler & Nut (x1)
• USB Cable (x1) 10m [32.8']
• Power Cable (x1) 10m [32.8']
• Lag Bolts (x4) & Instructions
SUGGESTED TOOLS
• (#2) Phillips Screwdriver
• Magnetic Level 6"-9" [150-230mm]
• 13mm Socket Wrench
The maximum length of the
full pipe (from the ceiling to
the device is is 30' [9.1m])
A:
9300 Gemini Drive, Beaverton, OR 97008
BASIC INSTALLATION
1. Attach ceiling mount to ceiling.
2. Thread wires through each pipe
section and screw pipes one to the
other (top down).
3. Secure bracket to last piece of pipe
with coupler, level and tighten upper
mounting bolts.
4. Remove table stand from bar.
5. Hang bar on bracket.
6. Secure bar to bracket.
7. Connect USB, power, and audio cables
to bar input panel.
8. Rotate bar up to the bracket.
9. Power and test the bar.
W:
www.biamp.com

Advertisement

loading
Need help?

Need help?

Do you have a question about the CBC 2500 PM and is the answer not in the manual?

Questions and answers

Summary of Contents for Biamp CBC 2500 PM

  • Page 1 Parlé Ceiling Mounted Bar: Pole Mount (CBC 2500 PM) Installation Guide CONTENTS BASIC INSTALLATION • Parlé ABC 2500/2500a Bar 1. Attach ceiling mount to ceiling. • Ceiling Mount Assembly (x1) 2. Thread wires through each pipe section and screw pipes one to the •...
  • Page 2 Installation on a ceiling Ceiling 1. Lag screws are provided to attach the upper mount assembly to the ceiling structure. If the lag screws aren't appropriate for the ceiling type, install the mount with appropriately rated fasteners. Keep the two side bolt nuts loose so the lower assembly can rotate to allow the pipe to hang vertically.
  • Page 3 5. Place a level on the pipe to confirm it is vertical and tighten the upper nuts on the side of the ceiling mount. Side Bolts / Nuts 6. Thread the bracket coupler onto the last pipe and then add the bracket and Pipe secure with the nut.
  • Page 4 Don’t use a twisting motion or rotate from one side only. 13. Power and test the bar. Press the Launch button to optimize the audio for the room. CONTACT US Email: support@biamp.com Web: support.biamp.com 9300 Gemini Drive, Beaverton, OR 97008 www.biamp.com 585.0428 24JAN2025...