Biamp PMA 2000-DM Installation Manual

Parlé
Video Display Mount Kit (PMA 2000-DM)
Installation Guide
ABOUT THIS KIT
The PMA 2000-DM kit mounts a Parlé 2000 series bar to an (X- or H-type)
VESA-mounted video display.
INSTALLATION CONSIDERATIONS
• This kit can be configured so the Parlé bar is above or below the display.
In most cases, this can be done without removing the display from the
VESA mount.
• Spring tension arms hold the bar against the video display. The brackets
and arms may be reconfigured depending on the size of the display, the
type of VESA mount, and the bar's position.
• Once the bar is mounted, the arms can be angled forward/backward for
better visibility or coverage.
• To use this kit, access to either the screws holding the VESA (X- or
H-type) mount to the display, or the vertical rails or U-channel on an
H-type VESA mounting system is necessary.
• Please read the initial pages of this guide to prepare for the installation,
and determine which configuration fits your appliction.
KIT CONTENTS / DETAILS
Pin
The pin keeps arm
extended during
installation of the bar
in an under-display
configuration.
A:
Brackets
Spring
Arm
Spring
Mechanism
Traveler Arm
Left Arm
Right Arm
9300 S.W. Gemini Drive Beaverton, OR 97008 USA
Hardware
Qty Description
4 M8 x 25 PH Screws
4 M8 x 30 PH Screws
4 M8 x 40 PH Screws
4 M8 x 45 PH Screws
4 Spacers
2 M6 x 12
Flat Head Screws
2 M6 Nuts
2 M8 Flat Washers
2 M5 x 8 PH Screws
Crossbar
CONFIGURATION KEY
1) PMA Kit attached to an H-style
(or X-Style) VESA mount with the
bar below the display.
2) PMA Kit attached to an X-style
(or H-Style) VESA mount with the
bar above the display.
3) PMA Kit shown attached to an
the vertical rails of a VESA mount
with the bar under the display.
4) PMA Kit shown attached to an
the vertical rails of a VESA mount
with the bar above the display.
5) Low Profile VESA mounts -
Install spacers between VESA
mount and TV to provide space for
the kit arms. The bar can then be
mounted above or below the TV.
Note: Must be able to remove TV from
the VESA mount to install the spacers.
W: www.biamp.com