Tyre Pressure Monitoring; Rdc Oe - BMW R 1200 S Rider's Manual

The readings mean:
: Oil level is correct.
OK
: Check the oil level the
CHECK
next time you stop for fuel.
: Oil level cannot be meas-
---
ured (conditions as stated above
not satisfied).
If you call up another read-
ing on the on-board com-
puter, this symbol remains visible
until the sensor again registers a
correct oil level.
The most recently measured
level is displayed for 5 seconds
when you next switch on the ig-
nition.
The oil sensor might be
defective if the "Check
oil level" message reappears
even though the oil level in the
oil sight glass is correct. In this
case, consult your authorised
BMW Motorrad dealer.
Tyre pressure
monitoring RDC
Viewing tyre-pressure
readings
Switch on the ignition.
Repeatedly press button 1 until
the tyre pressures appear on
the display.
OE
The tyre pressures are shown,
accompanied by the wording
. The front tyre pressure
RDC P
is on the left; the reading on the
right is the rear tyre pressure.
appears directly after the
-- --
ignition is switched on, because
the sensors do not transmit tyre
pressures until the motorcycle
accelerates to 30 km/h.
The tyre-pressure readings al-
ternate with the clock.
If the motorcycle has an on-
board computer the readings al-
ternate with the clock and the
values of the on-board computer.
4
49
z