Bulbs - BMW R 1200 S Rider's Manual

Installing rear-wheel
8
stand
104
Use screws 1 to set the rear-
wheel stand to the desired
z
height.
Remove retaining disc 2. To
do so, press release button 3.
Push the rear-wheel stand from
the right onto the rear axle.
Push the retaining disc on from
the left, while holding the un-
lock button down.
Grip the rear grab handle of the
motorcycle with your left hand
and use your right to grip the
lever of the rear-wheel stand 4.
Lift the motorcycle upright,
simultaneously pressing the
lever down until the stand sup-
ports the motorcycle in the up-
right position.
Press the lever down to the
ground.

Bulbs

General instructions
A warning appears in the multi-
function display if a bulb is de-
fective.
A defective bulb places
your safety at risk because