Rdc Warnings Oe; Self-Diagnosis Not Completed; Abs Fault - BMW R 1200 S Rider's Manual

Self-diagnosis not completed

3
ABS warning light flashes.
30
The ABS function is not
available, because self-
diagnosis did not complete. The
motorcycle has to move forward
a few metres for the wheel
sensors to be tested.
Pull away slowly. Bear in mind
that the ABS function is not
available until self-diagnosis has
completed.
ABS deactivated
z
ABS warning light shows.
The rider has switched off the
ABS system.
with OE Anti-lock braking system
(ABS):
Activate the ABS function
( 54)

ABS fault

ABS warning light shows.
The ABS control unit has detec-
ted a fault. The ABS function is
not available.
You can continue to ride the
motorcycle, but make due pro-
vision for the fact that the ABS
function is not available. Bear
in mind the more detailed in-
formation on situations that can
lead to an ABS fault (
Have the fault rectified as
quickly as possible by a
specialist workshop, preferably
an authorised BMW Motorrad
dealer.
RDC warnings
Mode of presentation
Warning symbol 2 indicates a
81).
critical tyre pressure, and the cor-
responding reading for the front
tyre pressure 3 or the rear tyre
pressure 4 flashes.
If the critical value is close to the
limit of the permissible tolerance
range, 'General' warning light 1
shows yellow. If the tyre pres-
sure registered by the sensor is
outside the permissible tolerance
range, the 'General' warning light
flashes red.
OE