Advertisement
Remote control for TV sets THOMSON / TCL ready to use
Before starting to use the product, read carefully and completely this manual and the
This remote control, after inserting the batteries, is normally ready for use as it is already set at the factory with a
If problems are found to command the TV, or some functions do not produce the desired effect, to follow the
The TLC EVO 5 remote control is designed to command a
The MELICONI remote control reproduces infrared signals corresponding to the original; the functions that operate in radio frequency
(e.g. voice commands and pointers) are not supported.
The remote control has a permanent memory, so it does not lose its settings even if there are no batteries in it.
Before using the product, it is recommended to read the safety warnings
The remote control requires 2 new 1.5V AAA/LR03 alkaline batteries, not included in the package. Insert with the
correct polarity as shown in figure.
DO NOT use rechargeable batteries.
BATTERIES TEST: Press and hold the
is released. If the light is off or blinks, the inserted batteries are low, therefore they need replacement.
Do not leave exhausted batteries inserted, as liquid may leak and damage the remote control
Before using the remote control, for each device you wish to control, it is essential to set a specific code, it matched.
Identify the specific code and set it into the remote control using one of the following ways:
SMARTPHONE
TABLET - WEB
Use the qr-code on the side or connect to the
Once you have found the specific code for your device, set it in the remote control as described in the ENTERING
THE CODE DIRECTLY chapter.
TLC EVO 5
Thank you for choosing a Meliconi remote control.
instructions to the chapter ACTIVATION OF REMOTE CONTROL.
SAFETY WARNINGS
included in the package and available at the following link:
https://www.cme.it/meliconi/safety.pdf
INSERTING THE BATTERIES
5
button and check that the LED remains on continuously until the button
ACTIVATION OF REMOTE CONTROL
SMARTPHONE - TABLET - WEB
www.cme.it
/ PJN22091 / PJN231236
safety warnings
specific code.
THOMSON / TCL
digital television sets.
MANUAL
SELECTION
page and follow the instructions.
MANUAL
SEARCH
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for MELICONI PJN22091
Summary of Contents for MELICONI PJN22091
- Page 1 The TLC EVO 5 remote control is designed to command a digital television sets. The MELICONI remote control reproduces infrared signals corresponding to the original; the functions that operate in radio frequency (e.g. voice commands and pointers) are not supported.
-
Page 2: Manual Selection
BUTTONS AND FUNCTIONS The functions of the buttons on the MELICONI remote control are only available if the original device is equipped with it. Sometimes some functions of the original remote control are not directly present on the MELICONI remote control keypad. -
Page 3: Child Mode
3. While the LED remains on, enter the code 1600. 4. While the LED flashes, within 30 seconds, on the MELICONI remote control press the button which you want to delete the function 5. Repeat the procedure from point 3 for each function you want to delete on MELICONI remote control. -
Page 4: Troubleshooting (Faq)
If necessary try to the RESET OF THE REMOTE CONTROL and carry out a new activation. ● IF SOME FUNCTIONS ARE NOT AVAILABLE ON THE REMOTE CONTROL Usually the MELICONI remote control makes available only the present functions on his keyboard, provided they are available also on the original remote control. -
Page 5: Disposal Of The Product
The symbol of the bins, indicating that the batteries should be disposed of according to current regulations; inquire on collection of spent batteries and accumulators in force in your country. Meliconi SpA, Via Minghetti 10 - 40057 Cadriano di Granarolo Emilia, (BO) Italy web: www.meliconi.com email: info@meliconi.com...
Need help?
Do you have a question about the PJN22091 and is the answer not in the manual?
Questions and answers