MELICONI PJN21051 Manual
  1. Manuals
  2. Brands
  3. MELICONI Manuals
  4. Remote Control
  5. PJN21051
  6. Manual
MELICONI PJN21051 Manual

MELICONI PJN21051 Manual

For tv sets samsung ready to use
Hide thumbs
1
2
3
4
5

Advertisement

Table of Contents

Personal 1+
/ PJN21051 / PJN240021
Remote control for TV sets SAMSUNG ready to use
Thank you for choosing a Meliconi remote control.
Before starting to use the product, read carefully and completely this manual and the
safety warnings
This remote control, after inserting the batteries, is normally ready for use as it is already set at the factory with a
specific code.
SAMSUNG
The Personal 1+ remote control is designed to command a
digital television sets.
Its ergonomic shape and soft rubber body make it easy to grip and protect it from shocks and drops.
By LEARN function, you can capture and store infrared signals from other remotes and match at will to one or more buttons.
The MELICONI remote control reproduces infrared signals corresponding to the original; the functions that operate in radio frequency
(e.g. voice commands and pointers) are not supported.
The remote control has a permanent memory, so it does not lose its settings even if there are no batteries in it.
SAFETY WARNINGS
Before using the product, it is recommended to read the safety warnings
included in the package and available at the following link:
https://www.cme.it/meliconi/safety.pdf
INSERTING THE BATTERIES
The remote control requires 2 new 1.5V AAA/LR03 alkaline batteries, not included in the package. Insert with the
correct polarity as shown in figure.
DO NOT use rechargeable batteries.
5
BATTERIES TEST: Press and hold the
button and check that the LED remains on continuously until the button
is released. If the light is off or blinks, the inserted batteries are low, therefore they need replacement.
Do not leave exhausted batteries inserted, as liquid may leak and damage the remote control

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the PJN21051 and is the answer not in the manual?

Questions and answers

Related Manuals for MELICONI PJN21051

Summary of Contents for MELICONI PJN21051

  • Page 1 By LEARN function, you can capture and store infrared signals from other remotes and match at will to one or more buttons. The MELICONI remote control reproduces infrared signals corresponding to the original; the functions that operate in radio frequency (e.g.

  • Page 2: Buttons And Functions

    3. While the LED remains on, enter the code 1600. 4. While the LED flashes, within 30 seconds, on the MELICONI remote control press the button which you want to delete the function 5. Repeat the procedure from point 3 for each function you want to delete on MELICONI remote control.

  • Page 3: Learn Function

    • Position the original remote control in front of the MELICONI remote control so the areas which emit the infrared signals are opposite each other at a distance of approximately 2 cm.

  • Page 4: Troubleshooting (Faq)

    ● IF SOME FUNCTIONS ARE NOT AVAILABLE ON THE REMOTE CONTROL Sometimes some functions of the original remote control are not directly present on the MELICONI remote control keypad. To enable them, operate as described in the BUTTONS AND FUNCTIONS chapter.

  • Page 5: Disposal Of The Product

    The symbol of the bins, indicating that the batteries should be disposed of according to current regulations; inquire on collection of spent batteries and accumulators in force in your country. Meliconi SpA, Via Minghetti 10 - 40057 Cadriano di Granarolo Emilia, (BO) Italy web: www.meliconi.com email: info@meliconi.com...

This manual is also suitable for:

Personal 1+Pjn240021

Table of Contents