Yealink MeetingBar A40 Quick Start Manual page 10

8
Pair with the CTP25 (Optional)
i
For a better pairing experience, we recommend starting the A40 first and then the CTP25.
Pair manually
If you purchased a bundle kit or connected CTP25 to A40 via a network cable, A40 and CTP25
i
would be paired automatically. You can go to
On the CTP25, enter the IP address and paring code of the A40 on display.
Initialization
1. If the CTP25 is restored to factory settings, you need to change the default password
(0000) of the CTP25.
2. Initialize Language, Network, Time Zone and Auto Update, and select the desired
platform. If you select General Mode, refer to the
3. Change the default password (0000) of the A40.
Account login
i
Contact the corresponding service provider to obtain an account.
Teams: The Teams login process is different in different deployment modes of CTP25.
3 Connect CTP25 with A40
Refer to the
• Direct Connection with an Ethernet
• Connection on the Same
1. Sign in to the same Teams account on CTP25 and A40.
2. Select the desired endpoint on the CTP25.
3. Enter the pairing code displayed on the endpoint on CTP25 and complete the pairing.
Method 1: Sign in on the website
Find a networked computer and operate it according
to the prompts of CTP25 and A40.
Zoom: Follow the prompts on CTP25 to sign in to the account.
CTP25
LAN:
Initialization
directly.
9 General Mode
section for CTP25 deployment.
Cable: Sign in to the Teams account on the CTP25.
Method 2: Sign in on the device
Use the remote control to operate it if your display
does not support touch.
8
MeetingBar A40
section.