BMW G 650 GS Rider's Manual page 94

8
90
Install screw 1.
Replacing rear-light and
brake-light bulb
z
If it is not standing firmly,
the motorcycle could topple
in the course of the operations
described below.
Always make sure that the
motorcycle is stable and firmly
supported.
Make sure the ground is level
and firm and place the motor-
cycle on its stand.
Switch off the ignition.
Remove two screws 1 and re-
move the rear-light glass.
Press bulb 2 into its socket
and turn it counter-clockwise to
remove.
Replace the defective bulb.
Bulb for tail light/brake
light
P21/5W / 12 V / 5 W / 21 W
Press bulb 2 into its socket
and turn it clockwise to install.