BMW G 650 GS Rider's Manual page 103

Pull the side panel out of the
mount at position 6, then work
the side panel up and clear of
the motorcycle. In this process,
take care not to damage rubber
boot 7.
Installing left side panel
Lower the side panel over the
oil filler neck from above. In
this process, take care not to
damage rubber boot 7.
Seat the side panel in the
centre trim panel at points 8
and push it into mount 6.
Tighten screw 5.
Install oil filler cap 4.
Install two screws 3.
Installing seat ( 39).
8
99
z