BMW G 650 GS Rider's Manual page 84

torcycle on a suitable auxiliary
8
stand.
80
with centre stand
Make sure the ground is level
and firm and place the motor-
cycle on its centre stand.
z
Remove screw 1 of the speed
sensor and remove the speed
sensor from the holder.
OE
Remove axle nut 2, counter-
holding at the left-hand side if
necessary.
Slacken adjusting screws 3 on
left and right by turning them
counter-clockwise.
Push the rear wheel as far for-
ward as possible and disen-
gage the chain from sprock-
et 4.