BMW G 650 GS Rider's Manual page 85

Remove quick-release axle 5,
supporting the rear wheel as
you do so.
Roll the rear wheel back until
it is clear of the swinging arm,
while holding the brake caliper
on the left-hand side.
The sprocket and the
spacer sleeves on left
and right are loose fits in the
wheel. Make sure that these
parts are not damaged or lost on
removal.
Install the rear wheel
Threaded fasteners not
tightened to the specified
torque can work loose or their
threads can suffer damage.
Always have the security of the
fasteners checked by a specialist
workshop, preferably an author-
ised BMW Motorrad dealer.
Make sure that the brake cal-
iper moves on guide 6.
Roll the rear wheel into the
swinging arm, making sure that
the brake disc passes between
the brake pads.
Lift the rear wheel and work
quick-release axle 5 through
the swinging arm, the brake
caliper and the rear wheel.
8
81
z