Table of Contents
Advertisement
Quick Links
Trademarks
Copyright © PLANET Technology Corp. 2003.
Contents subject to revision without prior notice.
PLANET is a registered trademark of PLANET Technology Corp. All other trade-
marks belong to their respective owners.
Disclaimer
PLANET Technology does not warrant that the hardware will work properly in
all environments and applications, and makes no warranty and representa-
tion, either implied or expressed, with respect to the quality, performance,
merchantability, or fitness for a particular purpose.
PLANET has made every effort to ensure that this User's Manual is accurate;
PLANET disclaims liability for any inaccuracies or omissions that may have
occurred.
Information in this User's Manual is subject to change without notice and does
not represent a commitment on the part of PLANET. PLANET assumes no re-
sponsibility for any inaccuracies that may be contained in this User's Manual.
PLANET makes no commitment to update or keep current the information
in this User's Manual, and reserves the right to make improvements to this
User's Manual and/or to the products described in this User's Manual, at any
time without notice.
If you find information in this manual that is incorrect, misleading, or incom-
plete, we would appreciate your comments and suggestions.
FCC Warning
This equipment has been tested and found to comply with the limits for a
Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference when
the equipment is operated in a commercial environment. This equipment gen-
erates, uses, and can radiate radio frequency energy and, if not installed and
used in accordance with the Instruction manual, may cause harmful interfer-
ence to radio communications. Operation of this equipment in a residential
area is likely to cause harmful interference in which case the user will be
required to correct the interference at his own expense.
CE Mark Warning
This is a Class A product. In a domestic environment, this product may cause
radio interference, in which case the user may be required to take adequate
measures.
Revision
PLANET Gigabit Ethernet Switch User's Manual
FOR MODELS: GSD-500/GSD-500S
Part No.: 2010-000025-000
Advertisement
Table of Contents
Related Manuals for Planet GSD-500S
Summary of Contents for Planet GSD-500S
- Page 1 PLANET has made every effort to ensure that this User’s Manual is accurate; PLANET disclaims liability for any inaccuracies or omissions that may have occurred.
-
Page 2: Table Of Contents
1.3 Product Features 1.4 Product Specifications Chapter 2 Installation 2.1 Product Description 2.2 Installing a GSD-500/500S 2.2.1 Desktop Installation Chapter 3 Configuration (GSD-500S) 3.1 Preparing for configuration 3.2 Getting Started Chapter 4 Switch Operation 4.1 Address Table 4.2 Learning 4.3 Forwarding & Filtering 4.4 Store-and-Forward... -
Page 3: Chapter 1 Introduction
It explains the functions of GSD-500/500S and how to physically install the GSD-500/500S. ● Section 3, Configuration It contains information about the smart function of GSD-500S. ● Section 4 Switch operation It contains troubleshooting and specifications of GSD-500/500S. ● Appendices... -
Page 4: Product Features
● Automatic source address learning and aging ● 10”, 1U height rack mounting size ● 100~240VAC, 50~60Hz universal power input Additional Feature of GSD-500S ● RS-232 console interface for console program management of smart feature ● Port trunking support to increase bandwidth between switches ●... -
Page 5: Product Specifications
Packet Control Runt & CRC filtering, Broadcast storm control Switching Fabric 10Gbps Switch Management (for GSD-500S only) Port Config Configure each port’s speed, duplex mode, flow control and priority Port Status Show each port’s link status and speed, duplex... - Page 6 Humidity 10% to 90% (Non-condensing) Regulation Compliance FCC, CE...
-
Page 7: Chapter 2 Installation
500/500S delivers five ports worth of high-performance, feature-rich integrated Gigabit Ethernet switching over traditional copper cabling. The GSD-500S is capable of smart functions, such as VLAN, Port trunking and Prot mirroring. GSD-500S can be configured by out-of-band channel via the console port (RS232) directly. Each port supports 10Mbps, 100Mbps, and 1000Mbps as well as half/full mode and can be easily connected to corporate backbones and servers. - Page 8 The rear panel of the Switch indicates an AC inlet power socket, which accepts input power from 100 to 240VAC, 50-60Hz. Figure 2-3 Rear Panel of GSD-500 Figure 2-4 Rear Panel of GSD-500S Power Notice: 1. The device is a power-required device, it means, it will not work till it is pow- ered.
-
Page 9: Installing A Gsd-500/500S
Please read the following topics and perform the procedures in the order being presented. PLANET GSD-500/500S Gigabit Ethernet Switch do not need software configuration. To install your GSD-500/500S on a desktop or shelf, simply complete the following steps. -
Page 11: Chapter 3 Configuration (Gsd-500S)
Chapter 3 CONFIGURATION (GSD-500S) Unlike the unmanaged switch (GSD-500), GSD-500S performs series smart functions that make the switch operate more effectively. This section will describe the common usage of the Switch Smart Configuration. 3.1 Preparing for configuration 3.1.1 Connecting a PC or Terminal to the RS-232 Port... -
Page 12: Power-Up Self-Test Status
As the switch powers on, it goes through a self-test process to ensure proper operations of the GSD-500S hardware. The messages will be displayed to show the test progress. When the test completes successfully, the system will display a login screen. If any of the components fails during the test, you may need to contact your local dealer and have the switch replaced. -
Page 13: Getting Started
Main Menu, please always enter the correct password. (See Figure 3-3) Figure 3-3 GSD-500S Login screen 3.2 Getting Started 3.2.1 General Guidelines GSD-500S allows users to configure the device via menu screens. To work within the menu, please follow the guidelines shown in Table 3-1. Item Description TAB KEY Choose next object in each function. - Page 14 3.2.2 Main Menu Screen The main menu enables you to view and manage the GSD-500S settings. Press the numbers 1-6 for chooses Smart function of GSD-500S. After enter into any smart function screen. Use the “Tab” keys to move the highlight over a selection. Press the “space bar”...
- Page 15 Type “2” to access the screen of (2) Port Config. This menu allows to view or changes the Port Configuration of GSD-500S. The user can determine such as Speed/Dpx, Flow control and priority. To modify these settings, use the “TAB” keys to move the highlight to the object and press the “Space Bar”...
- Page 16 Type “3” to access the screen of (3) Mirror Config. This function is used for verifying whether all the data is being transmitted and received properly, GSD-500S’s mirror port configuration allowing users to assign one snooping port to carry the same data stream from the monitored port.
- Page 17 Table 3-4 Descriptions of the Mirror Config screen Objects 3.2.6 VLAN Config Type “4” to access the screen of (4) VLAN Config. The GSD-500S support up to five port-based VLAN groups. Each port can assign to different group at the same time. The screen of VLAN Config in Figure 3-9 appears.
-
Page 18: Trunk Config
Link Aggregation function. Port 1 and Port 2 in the GSD-500S Gigabit Ethernet Switch can be bundled together to form a high-speed trunk. The screen of Trunk Config in Figure 3-10 appears. Table 3-6 shows the descriptions of the Trunk Config screen Objects. - Page 19 This item provides 3 various trunk modes. The trunk mode and descriptions are shown as below: Source port based: GSD-500S will check the source port to decide which port of the trunk to forward to. The screen in Figure 3- 11 appears.
- Page 20 Figure 3-14 Misc Config Screen Object Description Aging Time Allow user to set the aging time of GSD-500S. The available op- tions are disable. 300sec. 600sec. 900sec.1200sec. New Password Allow user to modify the password for GSD-500S. IP Priority Allow user to disable and enable this function and GSD-500S Mapping support 4-priority queue.
- Page 21 Figure 3-15 Misc Config/ IP Priority Mapping Screen...
-
Page 23: Chapter 4 Switch Operation
Chapter 4 SWITCH OPERATION 4.1 Address Table The Switch is implemented with an address table. This address table composed of many entries. Each entry is used to store the address information of some node in network, including MAC address, port no, etc. This information comes from the learning process of Ethernet Switch. -
Page 24: Auto-Negotiation
The Switch performs “Store and forward” therefore, no error packets occur. More reliably, it reduces the re-transmission rate. No packet loss will occur. 4.5 Auto-Negotiation The STP ports on the Switch have built-in “Auto-negotiation”. This technology automatically sets the best possible bandwidth when a connection is established with another network device (usually at Power On or Reset). -
Page 25: Chapter 5 Troubleshooting
Chapter 5 TROUBLESHOOTING This chapter contains information to help you solve problems. If Giga Switch is not functioning properly, make sure the Ethernet Switch was set up according to instructions in this manual. The Link LED is not lit Solution: Check the cable connection and remove duplex mode of the Giga Switch. -
Page 27: Switch's Rj-45 Pin Assignments
APPENDIX A A.1 Switch‘s RJ-45 Pin Assignments 1000Mbps, 1000Base T Contact MDI-X BI_DA+ BI_DB+ BI_DA- BI_DB- BI_DB+ BI_DA+ BI_DC+ BI_DD+ BI_DC- BI_DD- BI_DB- BI_DA- BI_DD+ BI_DC+ BI_DD- BI_DC- Implicit implementation of the crossover function within a twisted-pair cable, or at a wiring panel, while not expressly forbidden, is beyond the scope of this standard. - Page 30 Part No.:2010-000025-000...
Need help?
Do you have a question about the GSD-500S and is the answer not in the manual?
Questions and answers