Alienware AW2725Q User Manual page 16

Electrical specifications
Table 11. Electrical specifications.
Description
Video input signals
Input voltage/frequency/current
Inrush current
Power consumption
As defined in EU 2019/2021 and EU 2019/2013.
1
Maximum brightness and contrast setting with maximum power loading on all USB ports.
2
P : Power consumption of On Mode that is measured with reference to Energy Star test method.
3
on
TEC: Total Energy Consumption in kWh that is measured with reference to Energy Star test method.
This document is informational only and reflects laboratory performance.
Your product may perform differently, depending on the software, components and peripherals you ordered and shall have no
obligation to update such information.
So, the customer should not rely upon this information in making decisions about electrical tolerances or otherwise. No warranty as
to accuracy or completeness is expressed or implied.
About your monitor
16
Value
HDMI/DP, 600 mV for each differential line, 100 Ω input impedance per
differential pair
100 VAC to 240 VAC/50 Hz or 60 Hz ± 3 Hz/2.2 A (typical)
120 V: 30 A (maximum) at 0°C (cold start)
•
• 240 V: 60 A (maximum) at 0°C (cold start)
• 0.3 W (Off mode)
1
• 0.5 W (Standby mode)
39.4 W (On mode)
•
1
• 190 W (maximum)
2
31.1 W (P )
•
3
on
• 101.6 kWh (TEC)
3
1