Intended Use - Refco REFCLAMP Quick Manual

Intended use

The digital temperature clamp is designed to measure temperature
and humidity in mobile and stationary refrigeration systems and
heat pumps. This REFCO product may only be used by trained
refrigeration technicians. Observe the conditions of use from data
sheet.
Important safety instructions
Read all safety instructions thoroughly and comply with them.
The symbol Warning! indicates a possible dangerous
situation that can lead to serious injury if not avoided.
Safety instructions
Do not expose the temperature clamp to rain.
Always wear protective goggles and gloves when working
with the temperature clamp.
REFCO products are specifically designed and manufac-
tured to be handled by trained refrigeration technicians.
Due to the high pressures and temperatures, as well as the
chemical and physical gases used in refrigeration systems,
REFCO declines all responsibility and liability for accidents,
injuries and death.
REFCO expressly states that the products must only be
used by professionally trained experts. No use by children
or unqualified persons.
The temperature clamp must not be used in EX zones.