Icom IC-551D Instruction Manual page 28

—26—
AM OPERATION
1.
RECEIVING |
Set the MODE Select Switch to "AM".
Тит the Tuning Knob so that the beat caused with
the AM signal carrier becomes a "zero beat".
TRANSMITTING |
Set the MIC GAIN
CONTROL
to the CENTER
(12 o'clock) position, and the RF POWER
CONTROL to the fully counterclockwise position beyond the "click" (COMP OFF position).
P.B.T. UNIT AND VOX UNIT |
You can use these units the same as in SSB operation.
The operating procedures are described
in the SSB OPERATION section between page 22 and page 24.
1.
RECEIVING
Set knobs and switches as follows.
MODE SELECT SWITCH FMs or FMc
VFO SWITCH A or B
SOUELCH
CONTROL
Completely Counterclockwise