Icom IC-280E Instruction Manual page 5

Unpacking:
Carefully remove your transceiver from the packing carton and examine it for signs of shipping
damage. Should any be apparent, notify the delivering carrier or dealer immediately, stating the
full extent of the damage. It is recommended you keep the shipping cartons. In the event storage,
moving, or reshipment becomes necessary, they come in handy. Accessory hardware, cables, etc.,
are packed with the transceiver. Make sure you have not overlooked anything.
8. Gimp screws
9. Flat washers 1
10. Plug for speaker
. Mounting screws
12. Screws for additional bracket
13. Flat head screw's nuts
14. Mounting screw's nuts
Microphone (dynamic type)
Microphone hook
Power cord
Spare fuses (БА)
Installing holder A
Installing holder B
Installing angle joint
DIU uem
=> mt at A} „> „> aod
— cb
ъь ммо ~ м ь
Location:
Where you place the transceiver in your automobile is not critical and should be governed by
convenience and accessibility. Since the unit is so compact, many mobile possibilities present
themselves. In general, the mobile mounting bracket will provide you with some guide as to
placement. Any place where it can be mounted with metal screws, bolts, or pop-rivets will work.
For fixed station use, a power supply should be designed to produce 3 amps for the transceiver.
Mounting bracket installation Transceiver installation
| Mounting screw's nut
Car body p
р
Angle joint
L|] de
сы
~