Minolta MAGICOLOR 3300 User Manual page 124

This message...
ACC <X> FILE
FULL
ADC SENSOR
DUSTINESS <X>
ADJUST <INPUT>
BIN
CALIBRATING
CANCEL <N>
116
means...
The job or paper
accounting file is full
(<X> identifies the file).
The Automatic Density
Control (ADC) sensor is
dusty and an error or
warning has been
indicated.
The <INPUT> (specified
tray) is not inserted
correctly.
The printer is
performing an automatic
cleaning rotation.
One or more of the print
jobs <N> in the print
queue are being
canceled.
Status, Error, and Service Messages
do this...
This message should
be taken care of
immediately because it
may be masking
another problem.
If you want accounting
enabled, copy the job
accounting and paper
accounting files to
floppy disk(s), or
transfer them to your
host computer using ftp
(if available). Then reset
the accounting files so
that new jobs can be
accepted. If you don't
want to use accounting,
you can disable it.
Clean the density
sensor. See "How do I
clean the density
sensor?" on page 77.
Adjust the tray.
No action needed.
Press Select for all
jobs with a printing,
interpreting, spooled,
or terminating status to
be completely removed
from the system.