Turn Signal Light Switch; Horn Switch; Right Handlebar; Engine Stop Switch - Suzuki DR-Z400S Manual

TURN SIGNAL LIGHT SWITCH

"" 3
Moving the switch to the "" position
will flash the left turn signals. Moving
the switch to the "" position will
flash the right turn signals. The indi-
cator light will also flash intermittently.
To cancel turn signal operation, push
the switch on.
 WARNING
Failure to use the turn signals,
and failure to turn off the turn sig-
nals can be hazardous. Other driv-
ers may misjudge your course and
this may result in an accident.
Always use the turn signals when
you intend to change lanes or
make a turn. Be sure to turn off
the turn signals after completing
the turn or lane change.
HORN SWITCH "" 4
Press the switch to sound the horn.

RIGHT HANDLEBAR

ENGINE STOP SWITCH 1

"" position
The ignition circuit is off. The engine
cannot start or run.
"" position
The ignition circuit is on and the
engine can run.
Changing the engine stop switch
 
from to

while riding may damage to the
engine or the catalytic converter
(if equipped).
Do not use the engine stop switch
except for an emergency.

FRONT BRAKE LEVER 2

The front brake is applied by squeez-
ing the brake lever gently toward the
throttle grip. This
equipped with disc brake system and
excessive pressure is not required to
slow the machine down properly. The
brake light will be lit when the lever is
squeezed inward.
2-19
 
or from to
motorcycle
to
is