Related Manuals for PCE Instruments PCE-ALC 40
Summary of Contents for PCE Instruments PCE-ALC 40
- Page 1 USER MANUAL ALCOHOL TESTER PCE-ALC 40 User manuals in various languages (français, italiano, español, português, nederlands, türk, polski) can be found via our product search on: www.pce-instruments.com...
-
Page 2: Product Introduction
PRODUCT INTRODUCTION DETAILED STEPS 1. Power ON: Press power button to power. Air Intake Air Outlet The device beeps once, and the screen displays the interface of „tested times“ (Fig.1-3). Tested times is between 0 and 499, the green Indicator lights up. Tested times is between 500 and 999, the orange Indicator lights up. - Page 3 When the test value is 0.00mg/L: After a beep, the test value and the green indicator lights up (Fig. 7). When the test value is greater than 1.00mg/L: After 6 beeps, the test value and the red indicator lights The screen displays „OFF“ after 6s, and shuts down after 1.5 seconds. (Fig.8) up (Fig.
-
Page 4: Product Parameters
Record Mode: After the test, the data will be saved automatically, the device can save 50 sets of data Attention: Test values may be inaccurate in the following cases (Fig.19-20 ). Press and hold „Power“ button for 2 seconds to enter the record mode and press „Power“ 1. - Page 5 5. Do not blow saliva, residue or smoke in the mouth into the gas inlet of the device, otherwise residues ce with your local waste regulations. If you have any questions, please contact PCE Instruments. will be placed in the gas inlet and affect the dectection results.
Need help?
Do you have a question about the PCE-ALC 40 and is the answer not in the manual?
Questions and answers