Summary of Contents for Lattice CertusPro-NX Versa Board
Page 1
CertusPro-NX Versa Board Evaluation Board User Guide FPGA-EB-02053-1.3 March 2024...
Page 2
Lattice assumes no obligation to update or otherwise correct or revise this information. Products sold by Lattice have been subject to limited testing and it is the Buyer's responsibility to independently determine the suitability of any products and to test and verify the same.
The CertusPro-NX Versa Evaluation Board features the CertusPro-NX FPGA in the LFG672 package, which is built on the Lattice Nexus™ FPGA platform using low-power 28 nm FD-SOI technology. The board has the ability to expand the usability of the CertusPro-NX FPGA with SFP, PCIe, CSI, USB3 Controller, Raspberry PI HAT connector, PMOD, and access to 2×...
FT2232H Future Technology Devices International (FTDI) part to convert USB to JTAG. To use the built-in download cable, connect the USB cable from a PC with the Lattice Radiant Programmer tool installed to the mini USB connector on the board. The USB hub on the PC detects the cable of the USB function on Port 0, making the built-in cable available for use with the Radiant programming software.
Need help?
Do you have a question about the CertusPro-NX Versa Board and is the answer not in the manual?
Questions and answers