Related Manuals for Total TH215456 Series
Summary of Contents for Total TH215456 Series
- Page 1 PRODUCT MANUAL DEMOLITION BREAKER TH215456 UTH215456 TH215456xy UTH215456xy x(blank,1,2,3,4,5,6,7,8,9,E,S,A,M) y(blank,-1,-2,-3,-4,-5,-6,-7,-8,-9,E,S,A,M)
-
Page 2: General Power Tool Safety Warnings
| English Original Instructions GENERAL POWER TOOL SAFETY WARNINGS ⚠ WARNING Read all safety warnings, instructions, illustrations and specifications provided with this power tool. Failure to follow all instructions listed below may result in electric shock, fire and/or serious injury. Save all warnings and instructions for future reference. - Page 3 | English 3) Personal safety Stay alert, watch what you are doing and use common sense when operating a power tool. Do not use a power tool while you are tired or under the influence of drugs, alcohol or medication. A moment of inattention while operating power tools may result in serious personal injury.
- Page 4 | English pack, if detachable, from the power tool before making any adjustments, changing accessories, or storing power tools. Such preventive safety measures reduce the risk of starting the power tool accidentally. Store idle power tools out of the reach of children and do not allow persons unfamiliar with the power tool or these instructions to operate the power tool.
- Page 5 | English THE SYMBOLS IN INSTRUCTION MANUAL Double insulated for additional protection Read the instruction manual before using. CE conformity. Safety alert. Please only use the accessories supported by the manufacturer. Wear safety glasses, hearing protection and dust mask. Waste electrical products should not be disposed of with household waste. Please recycle where facilities exist.
-
Page 6: Additional Safety Warning
| English ADDITIONAL SAFETY WARNING ▶ Wear ear protectors. Exposure to noise can cause hearing loss. ▶ Use auxiliary handle(s), if supplied with the tool. Loss of control can cause personal injury. ▶ Hold the power tool by insulated gripping surfaces, when performing an operation where the cutting accessory may contact hidden wiring or its own cord. -
Page 7: Specifications
| English SPECIFICATIONS... -
Page 8: Technical Specifications
| English Adjustable auxiliary handle Locking bolt Fastening knob 10. Oil bottle Trigger lock 11. Spanner On / Off Switch 12. 2x Hex key Handle 13. Carbon brushes Protective cap for brush holder 14. carrying case Hex screw 15. Pointed chisel Tool holder 16. - Page 9 | English OPERATION PICTURE...
-
Page 10: Operation
| English OPERATION Before Use Do not use the product in potentially explosive atmospheres. Use the product only in ambient temperatures between 10 - 40°C. Disconnect the product from the power source before making any settings, mounting or replacing accessories and carrying out maintenance. ⚠... - Page 11 | English 8 pointing up. If there is no oil visible inside the window it must be topped up immediately. • Proceed as follows: Place the hammer on a level surface with the oil level window facing up. • Unscrew the oil level window using the 23 mm wrench 11 supplied. •...
- Page 12 | English Connect the mains. • Place the tip of the chisel at the point to be chiseled or demolished. • Operate the hammer using its own weight (see chapter "Switching on and • off"). Maintenance ⚠ Warning! Disconnect the machine from the mains before performing any maintenance or adjustments Only use spare parts / accessories from the manufacturer or authorized and qualified workshops.
- Page 13 | English MAINTENANCE&MALFUNCTIONS Possible malfunctions and methods of their eliminations Malfunction Probable causes Actions ● Switch failure ●The power cord or wiring is Disconnect When the machine is turned on, broken, power cord plug machine from the electric motor does not malfunction;...
- Page 14 TOTAL TOOLS WORLD MADE IN CHINA T0723.V09 TOTAL TOOLS CO., PTE. LTD. No. 45 Songbei Road, Suzhou Industrial Park, China.
Need help?
Do you have a question about the TH215456 Series and is the answer not in the manual?
Questions and answers