Furuno DC-2000 Operator's Manual

Operator's
Manual
DC-2000
Digital Compass
Do not disassemble or modify the
Use the correct fuse.
Vjr equipment.
Use of a wrong fuse can cause fire or
Fire, electrical shock or serious injury equipment damage.
canresult.
■Alarm Range, WPT No.
Speaker Mark
(Appears when
alarm is enabled.)
Display Selection
on/off
NAV Key
(Selects display mode.)
DAMP Key
(Sets damping factor.
Refer to installation manual.)
DIM/PWR Key
(Tums power on/off,
adjusts backlighting.)
AUDIO/OFF Key
(Silences aural alarm.)
COURSESETKey
(Sets course.)
RANGE SET Key
(Sets alarm range.)
Turning
the power
on/off
Turning the power on ^
Press [DIM/PWR]. Ship's heading or ship's speed appears.
Turning the power off
Press [DIM/PWR] and [AUDIO/OFF] together for more than two sec-
onds.
Adjusting
display
brilliance
V
Press [DIM/PWR] for more than two seconds. Then, each pressing of
the key changes the brilliance in one of four le vels. Current brilliance
setting [d-0 (dark), d-1, d-2 or d-3 (bright)] appears on the display. If
more than four seconds elapses between pressings of the key, last-se-
lected brilliance is used.
J
-
1
-