Interval Photography - Minolta DIMAGE RD 3000 - SOFTWARE Manual

INTERVAL PHOTOGRAPHY

Automatically record a series of photographs taken at a specified time interval.
During interval photography, each recorded frame is initially stored in the CF
card, after which it is saved in the specified folder on your hard disk.
To perform interval photography you must therefore have enough space in your
CF card for a minimum of one frame.
If the Frames Remaining value is 0, delete an image file or replace the cur-
rent CF card with one which has a Frames Remaining value of at least 1.
Follow the instructions on page 107 for adjusting the exposure/flash
1
correction value.
• If this operation is unnecessary, proceed to the next step.
Click the Time Lapse button.
2
• The Time Lapse Capture dialog box opens.
USING THE CAMERA PANEL
114
Before performing interval photography,
check that the Frames Remaining value
on the Camera Panel dialog box is at
least 1.