Dell Dimension 5150C Owner's Manual page 104

Admin Password
System Password
Password Status
Power Management
AC Recovery
Auto Power On
Auto Power Time
Suspend Mode
Quick Resume
Maintenance
Event Log
POST Behavior
Fastboot
Numlock Key
104
Appendix
This option provides restricted access to the computer's system setup in the
same way that access to the computer can be restricted with the System
Password option.
NOTE:
To delete a password, enter the old password and press <Enter> two
times.
Displays the current status of the system's password security feature and
allows a new system password to be assigned and verified.
This option locks the system password field with the setup password. When
the field is locked, you can no longer disable password security by pressing
<Ctrl><Enter> when the computer starts.
Determines what happens when AC power is restored to the computer.
Sets the computer to automatically turn on. Choices are every day or every
Monday through Friday.
The default setting is Off.
This feature does not work if you turn off your computer using a power strip
or surge protector.
Sets time to automatically turn on the computer.
Time is kept in a 24-hour format (hours:minutes). Change the start-up time
by pressing the right- or left-arrow key to increase or decrease the numbers,
or type numbers in both the date and time fields.
This feature does not work if you turn off your computer using a power strip
or surge protector.
The options are S1, a suspend state where the computer is running in a low-
power mode, and S3, a standby state where the power is reduced or turned
off for most components, however, system memory remains active.
This feature enables/disables the Intel Viiv Quick Resume Technology.
The default setting is Off.
Displays the system event log.
When set to On (default), your computer starts more quickly because it
skips certain configurations and tests.
This option involves the rightmost bank of keys on your keyboard. When set
to On (default), this option activates the numeric and mathematical
features shown at the top of each key. When set to Off, this option activates
the cursor-control functions labeled on the bottom of each key.