De Raat Hotelsafe saga HL Manual

Hotelsafe saga HL
General: First, read the manual carefully before you
start using the safe.
Important tips
The digital in every position indicate the different function.If you
wouldn't like to change the current setup,you only need to input
the same digital in corresponding position or press "#" to enter
into the next screen till quit . Once you changed their
setup ,please press the key "#" to save the latest setup when
quit the programming mode
Door position: OPEN (initial code is 1234 initial master code is
000000) key in "＊＊" ,the hotel safe LED will show "PROG ",
then input the programming code "751019" in 5 seconds after
"PROG" disappeared. Now the operation screen starts to enter
into programming mode
(input key "#" again,you will enter into the second screen)
The options:
(1) CODE APPEARANCE ON THE SCREEN
Press 0 – The presonal code number will not appear on the
screen each time when you input the code (namely is the
screen just shows "--------" instead of digit code when you input
the code to open or the door ).
Press 1 -The personal code number will appeared each time.
Default Parameter
HOTKEY FUNCTION: When the parameter you choosed is "0",
please press " 9#" , then input the code ,you will find the screen
will display digit code inputing. When the parameter you
choosed is "1", please press " 0#" ,the screen will display "HIDE
",then input the code ,you will find the display just show "------"
instead of digit code.
Please note "HOTKEY function "only take effects to the current
operation,that means activate "Hide or display the digital" by
HOTKEY is temporary.
(2)NUMBER OF COMBINATION CODE DIGITS
Press 3 -To program safe for 3 digit code.
Press 4 -To program safe for 4 digit code. Default Parameter
Press 5 -To program safe for 5 digit code.
Press 6 -To program safe for 6 digit code.
Press 7 -To program safe for 3-6 digit code.
(3)KEYPAD AUTO LOCKED AFTER CONSECUTIVE 4 WRONG CODE
Press 0 -for auto lock of 0 minutes.
Press 1 -for auto lock of 15 minutes. Default Parameter
Press 2 -for auto lock of 30 minutes.
(4) MASTER CODE
Press 2 - Master code is not in use
Press 3 - Master code is in use Default Parameter
How to reset the master code
1. You only can set up the master only when you select function
number "3",namely is that master is in use.
2. The back-up master code for the product on delivery from ma-
nufacturer is " ". The master code must to be programmed by 6
digits! Please don't set master code as "751019"
Door position: OPEN
1.Press "＊＊",the screen will show "PROG", then enter the back-
up master code and the LED display will show "NEW".
2.Please Key in the any combination of 6 digits that your desire in
5 seconds after "NEW " disappeared.
3.The LED display will show "AGAIN", then enter again the new
master code in 5 seconds after "Again " disappeared.
4. The LED display show "DONE", the new master code is set up
successfully