De Raat EM 015 Manual

Manual Sun Safe
Models: EM 015, ES 020, ES 031D, DES 020 & DES 031D
Opening the safe for the first time
Push the start button. On the screen you will see six bars
"_ _ _ _ _ _".
Now enter the pre-set factory code 1 2 3 4 5 6.
On the screen you will see "open".
Turn the knob to the right and turn the handle upwards
before the word "open" disappears.
Please note you have to change the pre-set factory
code after the you have opened your safe for the
first time.
How do I change the code in the lock?
Current (factory) code
Enter the current (factory) code and open the door.
On the inside of the door you will find a black cover.
Open this cover.
Behind this cover is a white memory button.
Press the memory button once.
On the screen you will see "-Code-" followed by "USEr_".
Now press 1 followed by the start button.
Now you will see six bars "- - - - - -".
Now enter your new 6-digit code.
On the screen you will see AgAiN.
Enter your new 6-digit code again.
Now you will see IN_1B which confirms your new code
has been programmed.
Screen
Knob
Possibilities for bolt-down:
These safes can be bolted-down to the
Battery cover
Hook on
battery cover
Start button
Keypad
How do I set a second code?
Enter the current code and open the door.
On the inside of the door you will find a black cover.
Open this cover.
Behind this cover is a white memory button.
Press the memory button once.
Now press 2 followed by the start button.
Now enter your new 6-digit code.
On the screen you will see AGAIN IN.
Enter your new 6-digit code again.
Now you will see IN1 which confirms your new code has
been set.
How do I hide the code on the screen?
Press the start button twice.
Now enter your code. The code will not be visible on the
screen.
How do I turn the sound of the lock on or off?
Enter the current code and open the door.
On the inside of the door you will find a black cover.
Open this cover.
Behind the cover you will see a white memory button.
Press this button for 3 seconds.
On the screen you will see the word "beep".
Next the screen will show "On-OFF".
Press 0 followed by start to turn on the sound.
Press 1 followed by start to turn off the sound.
floor.