De Raat Leisure plus Quick Start Manual

Leisure plus
Reed this manual before you use the safe.
To set master code
ATTEN: PLEASE SET NEW MASTER CODE PRIOR TO
USE!
Keep the door opened and unlocked.
Press key "CLEAR" twice, the display will show "PROG",
enter old master code (default "0-4-0-6-2-0") and press
"LOCK", the display will show "NEW".
Enter your new master code of 6 digits and press
"LOCK", the display will show "AGAIN".
Enter your new master code again, the display will show
"DONE" indicates new master code changed successfully.
To set personal code
The personal code could be changed with new code when
locking the safe each time.
Please input 4-6 digits new code and press "LOCK" to lock
the safe.
To unlock the safe with personal code
Enter the correct personal code. The door will open
automatically, and display will show "OPEN".
Caution: a) Display will show "ERROR" when wrong code
inputs. Four wrong code inputs consecutively put the safe
into secure
mode. Display will show "HOLD15" in effect the keypad is
inactive for 15 minutes.
b) To replace the code with "-" during the operation, please
press "0+LOCK". This set is valid only for current
operation.
Safety reference: All codes are to be
securely stored. Do
(i.e. Birthdays, telephonenumbers, etc) as
a code. Change the factory code before
How to set room number of safe
Double press "*" in HHD, display show "PROG".
Input "9999*6", HHD will show "NO", input 6-digit room
number and press "#", HHD will show "DONE" means room
number set ok. Please fill with "0" in the front of room
number if less than 6 digits.
How to set date and time
Please set the date and time of HHD before connect to a
safe.
1) Set the date and time of HHD
a. Double press "*" in HHD, display will show "PROG".
b. Input "9999" and press "*" then press key "1", HHD
will show current date, input correct date (dd-mm-yy) and
press "#", HHD will show current time, input correct time
(hh-mm-ss) and press "#" to finish.
2) Set the date and time of safe
a. Connect HHD with safe, Double press "*" in HHD,
display show "PROG".
b. Input "9999" and press "*" then press key "2", HHD
will show date then time and "DONE" means set ok.
NOT
use personal data