De Raat RVS Keysafe 179 E Manual

RVS Keysafe 179 E
The lock of the RVS keysafe 179E combines ease of
operation with security and flexibility. Its advanced
electronic circuit design makes it easy to open and easy to
change codes. Follow these instructions carefully to get the
best possible use from your lock.
Code entry and opening the safe
The following default codes are pre-set:
Master code: 11335577
User code: 2244
Enter a valid number code using the safe's keypad. After
successful entry, the blue LED lights up and the electronic
lock makes a whirring noise. Then, to open the safe, turn
the handle with the masunt logo on to the right to a
horizontal position. The mechanism will automatically lock
again after 3 seconds. To open, the code then needs to be
entered anew.
If the wrong code is entered incorrectly three times in
succession, the keypad will lock for ten seconds. To lock
the safe again, close the door and turn the handle back to
its vertical position.
IMPORTANT: Master and user codes should be changed
before mounting!
The codes: The basics
Mastercode:
The master code is eight digits long. Use the master code
to:
• open the lock
• change the master code
• change and delete the user code
Instructions for use
Note: In addition to the ten-digit keypad, the lock is
also equipped with a # key. The # key is hidden
behind the handle in locked position. To use the #
key, the safe lock must be opened.
• Blue LED = code accepted ;
rejected
Function:
Manual code assignment (user code mode)
The manual code assignment is pre-set by default.
Manually assigned codes are four digits long
Master code commands
Changing the master code
#Master code • 01 • New master code
code • •
Example: #11335577
Outcome: Master code has been changed to
12345678.
Changing the user code
#Master code • 02 • User code
Example: #11335577
Outcome: New user code 9999 is now active.
Deleting the user code
#Master code • 03 •
Example: #11335577
Outcome: User code deleted.
User code commands
Changing the user code
#User code • New user code
Example: #2244 • 6688
Outcome: New user code is now 6688.
• Red LED = code
• New master
• 01 • 12345678 • 12345678
••
• 02 • 9999 ••
• 03 ••
• New user code
• 6688 ••
••
••