De Raat Sun Safe ES 045 Quick Start Manual

Manual Sun Safe
Modellen: ES 045, ES 065, ES 080, ES 100, ES 150, ES 200, ES

Opening the safe for the first time

Push the start button. On the screen you will see six bars
"_ _ _ _ _ _".
Now enter the pre-set factory code 1 2 3 4 5 6.
On the screen you will see "open".
Turn the knob to the right and turn the handle upwards
before the word "open" disappears.
Please note you have to change the pre-set factory
code after the you have opened your safe for the
first time.

How do I change the code in the lock?

Current (factory) code
Enter the current (factory) code and open the door.
On the inside of the door you will find a black cover.
Open this cover.
Behind this cover is a white memory button.
Press the memory button once.
On the screen you will see "-Code-" followed by "USEr_".
Now press 1 followed by the start button.
Now you will see six bars "- - - - - -".
Now enter your new 6-digit code.
On the screen you will see AgAiN.
Enter your new 6-digit code again.
Now you will see IN_1B which confirms your new code
has been programmed.
400, ES 700
Handle Screen
These safes can be bolted-down to the
Keypad
Green/red light
Start button
Key lock
Hook on
battery cover
Battery cover

How do I set a second code?

Enter the current code and open the door.
On the inside of the door you will find a black cover.
Open this cover.
Behind this cover is a white memory button.
Press the memory button once.
Now press 2 followed by the start button.
Now enter your new 6-digit code.
On the screen you will see AGAIN IN.
Enter your new 6-digit code again.
Now you will see IN1 which confirms your new code has
been set.

How do I hide the code on the screen?

Press the start button twice.
Now enter your code. The code will not be visible on the
screen.

How do I turn the sound of the lock on or off?

Enter the current code and open the door.
On the inside of the door you will find a black cover.
Open this cover.
Behind the cover you will see a white memory button.
Press this button for 3 seconds.
On the screen you will see the word "beep".
Next the screen will show "On-OFF".
Press 0 followed by start to turn on the sound.
Press 1 followed by start to turn off the sound.
Possibilities for bolt-down:
floor.