Advertisement
Technical Support and E-Warranty Certificate www.vevor.com/support
TOE JACK
MODEL:108A-0050-00-00
We continue to be committed to provide you tools with competitive price.
"Save Half", "Half Price" or any other similar expressions used by us only represents an
estimate of savings you might benefit from buying certain tools with us compared to the major
top brands and does not necessarily mean to cover all categories of tools offered by us. You
are kindly reminded to verify carefully when you are placing an order with us if you are
actually saving half in comparison with the top major brands.
Advertisement
Table of Contents
Related Manuals for VEVOR 108A-0050-00-00
Summary of Contents for VEVOR 108A-0050-00-00
- Page 1 Technical Support and E-Warranty Certificate www.vevor.com/support TOE JACK MODEL:108A-0050-00-00 We continue to be committed to provide you tools with competitive price. "Save Half", "Half Price" or any other similar expressions used by us only represents an estimate of savings you might benefit from buying certain tools with us compared to the major top brands and does not necessarily mean to cover all categories of tools offered by us.
- Page 2 This is the original instruction, please read all manual instructions carefully before operating. VEVOR reserves a clear interpretation of our user manual. The appearance of the product shall be subject to the product you received. Please forgive us that we won't inform you again if there are any technology or software updates on our product.
-
Page 3: Parameter List
PARAMETER LIST Model 108A-0050-00-00 Top Lifting Range（mm） 370-570 Toe Lifting Range （mm） 25-230 Toe Capacity（t） Top Capacity（t） Product Size（mm） 305*140*370 Net Weight(kg) 23.9 PART LIST - 2 -... - Page 4 - 3 -...
- Page 5 - 4 -...
- Page 6 - 5 -...
-
Page 7: Security & Warnings
SECURITY & WARNINGS 1. Warning in advance 1.1 This jack shall be operated, maintained, and repaired only by qualified personnel. 1.2 The use of this jack should follow every important point described in this manual; otherwise, the injury of the operator or damage to articles might be caused because of neglect during the use of this jack. - Page 8 that it can be folded inside when retracting the jack. Use the jack only for the lifting and lowering of the load. Permanent holding of the load may overload the appliance and cause damage to persons and properties. 3.2 Method of operating Put a weight on the tooth plate of jack stably.
- Page 9 should be located in its base totally, and the pushing point to the weight should be close to the back end of the tooth plate as far as possible. 3.3.11 Never screw the adjustable screw (26) under any circumstance. Otherwise, a typical accident of jack-dropping might happen.
-
Page 10: Troubleshooting Guide
(4)The pump should be operated normally without load. 6.1.2 Under the frequent use of the jack, the time of checking shall be shortened as well, and the following checking points shall be emphasized: (1) All of the jack stoppers, screws, and nuts should be screwed up sufficiently and should be adjusted when it is necessary. - Page 11 Jack can not be Screw out the unload handle The release valve is released down at the (22) in counter-clockwise not opened enough top position direction. Jack can not pumped Screw out the screw (24), and Oil is not enough. up to its rated max add enough hydraulic oil.
- Page 12 Technical Support and E-Warranty Certificate www.vevor.com/support...
Need help?
Do you have a question about the 108A-0050-00-00 and is the answer not in the manual?
Questions and answers