Page 1
Technical Support and E-Warranty Certificate www.vevor.com/support MACHANICAL JACK We continue to be committed to provide you tools with competitive price. "Save Half", "Half Price" or any other similar expressions used by us only represents an estimate of savings you might benefit from buying certain tools with us compared to the major top brands and doses not necessarily mean to cover all categories of tools offered by us.
Page 2
CustomerService@vevor.com This is the original instruction, please read all manual instructions carefully before operating. VEVOR reserves a clear interpretation of our user manual. The appearance of the product shall be subject to the product you received. Please forgive us that we won't inform you again if there are any technology or software updates on our product.
Page 4
Basic Safety precautions 1.Be sure the base of the jack is on firm and level ground. 2. Be sure the jack will not slip after the load is applied. 3. Be sure the lifting arm is fully under load is applied. 4.
Page 5
4. Instruction for use A. TO RAISE A LOAD 1. Following all safety precautions, place the foot of the jack beneath the load. Lift the Reversing Latch (20)to its' "UP" position and ensure it is locked in place, with the indentation in the Latch firmly engaged in the - 4 -...
Page 6
notch on the Reversing Switch (18)-refer to fig.1.Jack up the nose until it comes into contact with the load at the desired point of the lift. Pause at this stage and check to ensure no obstacles to a clean lift. 2.
Page 7
6.Common fault analysis fault phenomeno failure cause solution The actual load weight The actual load weight The jack exceeds the maximum does not exceed the deformation product load maximum product load - 6 -...
Page 8
Technical Support and E-Warranty Certificate https://www.vevor.com/support Made In China...
Need help?
Do you have a question about the AH081048 and is the answer not in the manual?
Questions and answers