VEVOR 8T Quick Start Manual
  1. Manuals
  2. Brands
  3. VEVOR Manuals
  4. Jacks
  5. 8T
  6. Quick start manual
VEVOR 8T Quick Start Manual

VEVOR 8T Quick Start Manual

Long ram jack
Hide thumbs

Advertisement

Table of Contents

Technical Support and E-Warranty Certificate www.vevor.com/support
LONG RAM JACK
MODEL: 8T
We continue to be committed to provide you tools with competitive price.
"Save Half", "Half Price" or any other similar expressions used by us only represents an
estimate of savings you might benefit from buying certain tools with us compared to the major
top brands and does not necessarily mean to cover all categories of tools offered by us. You
are kindly reminded to verify carefully when you are placing an order with us if you are
actually saving half in comparison with the top major brands.

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 8T and is the answer not in the manual?

Questions and answers

Related Manuals for VEVOR 8T

Summary of Contents for VEVOR 8T

  • Page 1 Technical Support and E-Warranty Certificate www.vevor.com/support LONG RAM JACK MODEL: 8T We continue to be committed to provide you tools with competitive price. "Save Half", "Half Price" or any other similar expressions used by us only represents an estimate of savings you might benefit from buying certain tools with us compared to the major top brands and does not necessarily mean to cover all categories of tools offered by us.
  • Page 2 This is the original instruction, please read all manual instructions carefully before operating. VEVOR reserves a clear interpretation of our user manual. The appearance of the product shall be subject to the product you received. Please forgive us that we won't inform you again if there are any technology or software updates on our product.
  • Page 3 Warming: For your safety to prevent injury, please read very careful about the following warnings and operating instructions: This is just a lift drive, which is designed to be used with cranes to lift  heavier loads. Do not use this product for any purpose other than that for which it was intended.
  • Page 4 OPERATION INSTRUCTIONS: 1.Before operating, estimate the weight of the load.Do not overload the jack beyond It’s rated load. 2.Select point of action according to the gravitational center place the jack on the hard ground it necessary, Place a hard plank under the jack so to avoid tottering or falling during operation.
  • Page 5 piston rod will rise slowly till the height you need.then immediately transfer the load to appropriately-rated support devices such as jack stands. 3.You can also use a pneumatic lifting jack, you need to connect the air source to the jack's joint (its model number is: 20PM),and then squeeze the lift control valve until the load rises to the height you need.

  • Page 6: Routine Maintenance

    Without a supporting rack, it is not allowed to work under the lifted heavy body after it is raised. ROUTINE MAINTENANCE Proper quantity of oil should be maintained, otherwise the specified lifting height would not be reached. To avoid damaging, the jack should be kept from shocking while in operation.

  • Page 7: Parameter Table

    3.Fill with good quality jack oil. Reinstall oil filler Plug. Pour out the oil Lubrication 1.A coating of light lubricating oil to pivot points axles and hinges will help to prevent rust and assure that wheels, casters and pump assemblies move freely.
  • Page 8 Dimensions Model (mm) (mm) (mm) (mm) (mm) Φ17 Φ17 φ30 - 7 -...
  • Page 9 Air exhaust method of pneumatic jack If the pneumatic jack cannot rise normally, You can pull the piston rod up some distance or you can try the following methods: 1.Connecting air source,Turn on the 2.Tighten the oil drain valve pneumatic switch , always on. 3.Use an M8 hex head screwdriver,loosen the screws until the hydraulic oil is released and the jack is raised, then lock.
  • Page 10 Plunger pump installation instructions - 9 -...

  • Page 11: Troubleshooting

    TROUBLE SHOOTING Symptom Possible Causes Corrective Action Method 1: Connect the air source, turn on the air switch, and pull the jack piston Manual rod upward a small section; function Method 2: Connect the air source, turn Air is present inside works fine, on the air switch, loosen the bottom the jack and needs...
  • Page 12 Technical Support and E-Warranty Certificate www.vevor.com/support...

Table of Contents