Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for CAME TH/550 WH WIFI
Summary of Contents for CAME TH/550 WH WIFI
- Page 1 FA02018-EN TH/550 WH WIFI OPERATING AND INSTALLATION MANUAL English...
- Page 2 • Only use this product for its intended purpose. Any other use is hazardous. • Came S.p.A. is not liable for any damage caused by improper, erroneous or unreasonable use. • Only use soft, dry or slightly damp cloths to clean the device. Do not use any chemical products.
-
Page 3: Description Of Parts
DESCRIPTION 845AA-0060 TH/550 WH WIFI Wall-mounted Wi-Fi touch-screen programmable thermostat in white. Power supply 230 V AC. Description of parts ① ② ③ ④ ⑤ ⑥ ⑦ ⑧ ⑨ ⑯ ⑩ ⑪ ⑫ ⑭ ⑬ ⑮ ① Wi-Fi connection status Boiler in operation ②... -
Page 4: Installation
Technical data MODELS TH/550 WH WIFI Power supply (V) 230 AC Operating temperature (°C) 0-40 Maximum relative operating humidity (%) 93 No condensation Wireless frequency field (MHz) 2.412 - 2.472 Item Accuracy of internal probe (°C) ±0,5° INSTALLATION... -
Page 5: Electrical Connections
ELECTRICAL CONNECTIONS Make the electrical connections according to the device controlled by the programmable thermostat. Please consult the technical documentation for the device to be controlled. In the event of a loss of power, the relay maintains the status it had prior to the power outage. -
Page 6: Final Operations
Example 2 ② ③ Open valve Closed valve FINAL OPERATIONS... -
Page 7: Reboot Device
Reboot device Use a suitable stick to press the restart key. Release it when the screen goes dark and wait for a few seconds. GETTING STARTED Download the THermo Wi-Fi app from Google Play Store or the App store. wi-fi Before accessing the THermo Wi-Fi app, make sure that your smartphone/ tablet is connected to the internet with mobile data network exchange or to a Wi-Fi network that allows you to navigate correctly and view the CAMEConnect Cloud... - Page 8 Icon key Icon Status Meaning Flashing icon (1 s ON, The programmable thermostat is generating a 1 s OFF) Wi-Fi network and is not yet configured. Flashing icon (1 short The programmable thermostat has been flash every 3 seconds) configured and is trying to connect to the set Wi-Fi home network.
- Page 9 WELCOME TO CAME THERMO WI-FI WELCOME TO CAME THERMO WI-FI The CAME THermo Wi-Fi app allows you to manage your programmable thermostat from anywhere. Weekly time programming Scenarios and routines Start using App Try the demo You can start using the app or try out...
- Page 10 Enter the required data to create a new CREATE NEW ACCOUNT CAMEConnect account. Log in. C�oo�e���un��ue�u�e�n��e�����������e�u�e���o���u�u�e��o��n��� Passwords must have between 8 and 70 characters, ����e����one����������e�e���n��one��o�e����e��e�e��� �e�en�e�������o��� ��n���o����e���� Continue Cancel...
-
Page 11: Device Pairing
Follow the in-app wizard to add a new device. Device pairing Scan QR code Scan the QR code for pairing. There is an icon below Scan the QR code for pairing. There is an icon belo� it to help �ou recognise it.� If you don’t have access to the QR Code, you can select The QR code can be found on the protective film on the front glass or inside the device. - Page 12 Device pairing Device pairing Wi-Fi pairing Wi-Fi pairing You can now connect the TH550 to your home network. Enter the 4-digit code shown on the thermostat display� If the code doesn’t show, try temporarily deactivating the Wi-Fi on TH550 your smartphone and turning off the TH550 by disconnecting it from the wall bo���...
- Page 13 DEVICE pairing Wi-Fi pairing House settings This may take a few minutes. During this time, do not switch off the thermostat and do not Give the zone or room where you thermostat is �ea�e this screen.� installed a name�� �one��oom name �� �ouse name ��...
- Page 14 DEVICE pairing hOME lOUNGE ROOM Manual SetPoint 20.5° DEVICE CONFIGURATION COMPLETED SUCCESSFULLY! Resetting the network credentials If the programmable thermostat is not connected, you may need to set the network login details again. Select the programmable thermostat to be configured. Reset the Wi-Fi configuration (reset the programmable thermostat NET menu).
- Page 15 USING THE DEVICE – AUTOMATIC OPERATION The following basic operation modes can be selected both from the THermo Wi-Fi app and from the programmable thermostat itself. When first switched on, the programmable thermostat is in automatic heating mode. The temperature measured appears on the display. With automatic operation, you can use the programmable thermostat with predefined time programming in heating or cooling mode, at three preset temperature levels.
-
Page 16: Change Mode
Programming table for Saturday and Sunday For Cooling, see the programming table from Monday to Friday. Time Heating temperature level Midnight to 7 am 7 am to 2 pm 2 pm to 5 pm 5 pm to 10 pm 10 pm to midnight Change mode ①... - Page 17 Customising weekly temperature programming Use the arrows to view the temperature set for the time selected on the display. ① The display will show: day of the week time programmed temperature ② Use the arrows to change the temperature set for the time selected.
- Page 18 Copying programming to more than one day Display the heat trend you want, and press and hold the temperature ① diagram until the word [COPY] appears. ② Tap the temperature diagram to change the day for which to copy the programming.
- Page 19 Customising T1, T2 and T3 temperature values ① Press and hold down the area shown to select the mode for which you want to change the levels: Heating mode Cooling mode Press and hold the temperature ② ③ shown on the display until the screen appears.
- Page 20 USING THE DEVICE – MANUAL OPERATION ① Press symbol until the display shows the manual operation symbol ② Use the arrows to set the desired function. The value entered remains valid until the type of operation or set temperature is changed. If no keys are pressed, after a few seconds the detected temperature will show again on...
- Page 21 OPERATION WITH ALL-PURPOSE PROGRAM The all-purpose program can be used during mid-week holidays, public holidays, etc., can be started at any time during the current day and remain active until the end of that day, or it can be set up in advance for any day of the week. Activating the all-purpose program for the current day ①...
-
Page 22: Additional Functions
OPERATION EXCLUDING HEAT CONTROL Operation excluding heat control allows heating mode to be deactivated, while keeping frost-protection mode on. In cooling mode, frost-protection mode is off and heat control is excluded. ① Press symbol until the display shows the heat control exclusion program symbol. -
Page 23: Setting The Date And Time
Setting the date and time ① Tap the clock area and hold until the minutes start to flash ② Use the arrows to set the desired value. Press the symbol to set the time. Continue pressing the button to change the date and the time format shown on the display (12-hour or 24-hour clock). -
Page 24: Operating Example
Changing the calibration of the temperature detection sensor If the location of the device does not allow the temperature to be read correctly, the detected temperature can be changed by +/- 3°C, in tenths of a degree. Use the arrows to change the detected temperature. - Page 25 Setting the type of heat management algorithm The device lets you choose the type of algorithm to apply to manage the system: - Thermal differential algorithm - Proportional-Integral algorithm ① Use the arrows to select a type of algorithm. Press the symbol to confirm.
- Page 26 Proportional-Integral algorithm If the device is part of a home-automation system, the proportional algorithm is not available. For systems with significant variations in the outdoor temperature. Optimise consumption and reduce boiler ignition times by setting a minimum boiler ignition time as part of a cycle. There are 3 pre-configured programmes and 1 manual programme available for setting parameters.
- Page 27 Customise program P4 ⑤ Use the arrows to set the desired value for: [CYCL] = Cycle duration [ton] = Minimum on time [bAnd] = Proportional band value Press the symbol to confirm and move on to the next parameter. Example of thermal control with the Proportional-Integral algorithm Proportional band in degrees Centigrade Time in minutes Temperature setpoint...
-
Page 28: Screen Backlighting
Setting the unit of measurement for the temperature Use the arrows to choose the unit of measurement for the temperature. Press the symbol to confirm and move on to the next parameter. Screen backlighting By selecting ON with the arrows ( ), the backlighting will always be on. -
Page 29: Firmware Version
Enabling/disabling the screen lock The factory settings do not provide for any protection against changes being made to the device. ① Use the arrows to activate or deactivate the function. Press the symbol to confirm. From this screen it is possible to set the code to unlock the device (factory set to 123). - Page 30 Checking Wi-Fi signal quality This screen shows the Wi-Fi signal reception quality (as a percentage). Where the signal strength is <20%, the signal is insufficient Press the symbol to confirm and move on to the next parameter. Resetting the device and updating the firmware There are 3 types of reset: [RESET TH] = thermal reset;...
-
Page 31: Cleaning The Screen
CLEANING THE SCREEN With the device in standby mode, press and hold the button for a few seconds. A beep and flashing icon indicate that the screen is sensitive to touch for 30 seconds. Only use soft, dry or slightly damp cloths to clean the device. Do not use any chemical products. - Page 32 CAME S.p.A. Via Martiri della Libertà, 15 31030 Dosson di Casier Treviso – Italy Tel. (+39) 0422 4940 Fax (+39) 0422 4941...
Need help?
Do you have a question about the TH/550 WH WIFI and is the answer not in the manual?
Questions and answers