Related Manuals for DUSK Wiltshire FTRD46VS
Summary of Contents for DUSK Wiltshire FTRD46VS
- Page 1 Box dimensions:double bed:box 1:L158xW127XH16(CM) box 2:L208xW34XH14(CM) Wiltshire Ottoman Bed Frame Double Two person assembly Up to 2 hours assembly time Page 1...
- Page 2 Important Assembly Tip Before you begin, it's best to identify all of the parts and fittings to build your ottoman bed frame. We advise laying these out on the floor to check you have everything, and to familiarise yourself with all of the parts and fittings before building.
- Page 3 Operating Your Ottoman Bed Frame Safely · Caution, this ottoman bed frame uses a pressurised mechanism. · Please ensure children and animals are kept away from the ottoman bed frame when operating the mechanism. · Use caution when operating, and always use two hands at arm's length. ·...
- Page 4 Page 4...
- Page 5 Parts Check list No. Parts List Box No Box No Box 1 Box 1 Headboard Hand strap Box 1 Box 1 Non-woven Fabric Plastic cap 30PCS +2extra Box 1 Box 1 15PCS Footboard Plastic caps +2extra Box 1 Box 2 Left lift Mechanism Left Side Panel Box 1...
- Page 6 Step 1: Attaching the Leg to the Headboard & Footboard Step 2: Attaching the Bolts to the Headboard 4pcs 1/2" Page 6...
- Page 7 Step 3: Attaching the Bolts and Plastic block to the Footboard 2pcs 4pcs 1/2" Step 4: Attaching the Connector to the Lift/Right Side Panel 8pcs Page 7...
- Page 8 Step 5: Attaching the Left Side Panel and Right Side Panel to the Footboard.hook the Connector onto the screws before tightening fully. Step 6:Attaching the Left/Right Side Panel to the Headboard, hook the Connector onto the screws before tigihtening fully. Page 8...
- Page 9 Step 7: Attaching Triangle connector to the Footboard and Left/Right Side Panel 8pcs Step 8:Attaching Bar Rail to the Left/Right Side Panel 2pcs Page 9...
- Page 10 Step 9:Attaching the Side Ottoman Tube & Middle Ottoman Rail to the Front/Back Ottoman Metal Rail Step 10: Screwing the Side Ottoman Tube & Middle Ottoman Rail to the Front/Back Ottoman Metal Rail 12pcs Page 10...
- Page 11 6pcs Page 11...
- Page 12 Step 13: Attaching the Left lift Mechanism and Right lift Mechanism to the Left Side Panel and Right Side Panel 8pcs Step 14: Attaching the Mattress Support to the Front Ottoman Metal Rail & Attaching the Cross Rail to the Side Ottoman Tube 6pcs Page 12...
- Page 13 Step 15: Attaching the Non-woven Fabric Step 16: Attaching the Hydraulic Rod to the Left/Right lift Mechanism 4pcs Page 13...
- Page 14 Step 17: Attaching the Slat to the Ottoman Metal Frame Step 18: Attaching the Hand Strap to the Back Ottoman Metal Rail Warning: If you are experiencing problems closing your gas struts please refer to the last page for trouble shooting. Page 14...
-
Page 15: Care And Maintenance
Care and Maintenance Here are some good tips to keep your new ottoman bed frame in tip-top condition. Cleaning To clean your new ottoman bed frame, we advise using a damp cloth if the fabric is dusty or a low suction vacuum. Do not use abrasive chemicals or bleach as this may damage the product.
Need help?
Do you have a question about the Wiltshire FTRD46VS and is the answer not in the manual?
Questions and answers